Ricoh CL7000 Setup Manual page 64

Installing Options
G G G G
Assign the IP address to the printer.
Do not overlap the IP address in
the same subnet or the same IP ad-
dress in the network setting.
Note
❒ To get the IP address for the
printer, contact your network
administrator.
A Press { { { { U U U U } } } } or { { { { T T T T } } } } until the fol-
lowing message appears:
IEEE 1394 Setup:
4
IP Address1394
B Press { { { { Enter #} } } } .
The current IP address appears
on the display.
IP Address1394:
000.000.000.000
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to enter the
leftmost entry field of the IP
address.
IP Address1394:
192.000.000.000
D Press { { { { Enter #} } } } .
The cursor (k) moves to the next
entry field automatically.
IP Address1394:
192.02k.000.000
Note
❒ The value changes in incre-
ments of 10 if { { { { U U U U } } } } or { { { { T T T T } } } } is
kept pressed.
❒ You can return the cursor (k)
to the previous (left) entry
field by pressing { { { { Escape} } } } .
52
❒ If you press { { { { Escape} } } } when
the cursor (k) is in the left-
most position, the selected IP
address is reset.
E Repeat steps C C C C and D D D D to enter
the IP address.
IP Address1394:
192.168.000.011
Check the cursor (k) is in the
rightmost position, and then
press { { { { Enter #} } } } to register the IP
address you selected.
IEEE 1394 Setup:
IP Address1394
H H H H
Set "Subnet Mask1394" in the
same way.
I I I I
Set "SCSI print" and "Bidi-SCSI
print" if necessary.
Note
❒ The default is "Active".
J J J J
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "SCSI
print".
IEEE 1394 Setup:
SCSI print
K K K K
Press { { { { Enter #} } } } .
The following message appears on
the display:
SCSI print:
*Active
L L L L
Press { { { { U U U U } } } } or { { { { T T T T } } } } to select either
"Active" or "Not Active", and
then press { { { { Enter #} } } } .
Set "Bidi-SCSI print" in the same
way.