Ricoh CL7000 Setup Manual page 46

Installing Options
C
Installing the 1394 interface
unit, USB 2.0 interface board,
802.11b interface unit or Blue-
TM
tooth unit.
(1394 Interface Unit Type 4510)
(USB 2.0 Interface Board Type A)
(802.11b Interface Unit Type A)
(Bluetooth Unit Type 2045)
D
Install the user account enhance
4
unit
(User Account Enhance Unit
TypeC)
E
Install the printer hard disk.
(Printer Hard Disk Type 7000)
F
Attach the duplex unit.
(Duplex Unit Type 7000)
G
Attach the 2 tray finisher.
(SR770)
H
Attach the 4-bin mailbox.
(Mail Bin Type 3800C)
*1
The bypass tray is included.
34
Install the 1394 interface unit, USB interface board,
802.11b interface unit or Bluetooth unit on the controller
board.
The 1394 interface unit and the standard Ethernet inter-
face cannot be used at the same time.
Only one of the following can be installed:
• 1394 interface unit
• USB interface board
• 802.11b interface unit
• Bluetooth unit
T
Install the module to the user account enhance unit slot of
the controller board.
T
Install the Printer Hard Disk Type 7000 to the controller
board.
T
Attach the duplex reversal unit to the left side of the print-
er, and the duplex feed unit inside the printer.
T
Attach the 2 tray finisher to the left side of the printer.
You cannot install the 2 tray finisher unless both the paper
feed unit and duplex unit options are installed.
If you choose to install the 4-bin mailbox, you cannot in-
stall the 2 tray finisher.
The 2 tray finisher requires the optional printer hard disk
or the optional memory unit with at least 64 MB (total
memory size 128 MB or more).
T
Remove the upper cover to attach Mail Bin Type 3800C.
If you choose to install the 2 tray finisher, you cannot in-
stall the 4-bin mailbox.