Ricoh CL7000 Setup Manual page 102

Installing Options
O O O O
Check the cable of the 4-bin mail-
box is in position, as shown.
If it is not, change its position in the
direction of (A) ⇒ (B).
4
P P P P
Connect the cable from the 4-bin
mailbox to the lower connector on
the back of the printer.
Q Q Q Q
Insert four output bins in order,
starting from the bottom.
90
Note
❒ If you have decided to assign
mail box bins to individuals and
departments, write their names
on the labels provided and stick
them to the sides of the 4-bin
mailbox.
Note
❒ After finishing installation, you
can check the 4-bin mailbox is
installed properly: Print the
configuration page from the
"List/Test Print" menu. If it is
installed properly, you will see
ZDJP091J
"4-bin Mailbox" appear under
the "Options" list.
❒ If the 4-bin mailbox is not in-
stalled properly, repeat the pro-
cedure from step
cannot install it properly even
after reinstallation, contact your
sales or service representative.
Reference
p.23 "Test Printing"
R R R R
Check for this leftover part. You
will not use this.
ZHXH260J
ZDJP099J
A
. If you
ZDJP101J