Ricoh CL7000 Setup Manual page 48

Installing Options
7.
Duplex Feed Unit
Transports paper during duplex
printing. Install the unit inside the
printer.
See p.77 "Installing the Duplex Rever-
sal Unit".
Important
❒ You cannot install the 2 tray finisher unless both the paper feed unit and
duplex unit options are attached.
❒ You cannot install the 2 tray finisher unless at least the optional 128MB
SDRAM module, or printer hard disk is installed.
❒ You cannot install both the 2 tray finisher and 4-bin mailbox at the same
time.
4
❖ ❖ ❖ ❖ Interior
1
2
1.
Memory Unit TypeC (SDRAM
Module)
Install 64 MB, 128 MB, or 256 MB
RAM into the controller board slot.
S e e p . 46 "Me m o ry U n it T y p e C
(SDRAM Module)".
2.
1394 interface unit/USB interface
board/802.11b interface unit/Blue-
tooth unit
See p.48 "1394 Interface Unit Type
4510".
See p.54 "USB 2.0 Interface Board
Type A".
See p.57 "802.11b Interface Unit Type
A".
See p.64 "Bluetooth Unit Type 2045".
36
3.
User Account Enhance Unit
TypeC
See p.67 "User Account Enhance Unit
TypeC".
4.
Printer Hard Disk Type 7000
Install the printer hard disk to the con-
troller board.
See p.70 "Printer Hard Disk Type
7000".
3
4
ZHXP011J