Test Printing - Ricoh CL7000 Setup Manual

Test Printing

Test print in order to check that the
printer is working normally. Test
printing checks printer performance;
it does not test the connection to the
computer.
Here, you can print the configuration
page to check the options.
The machine may make a rustling
sound while printing. However, this
does not indicate a malfunction and
will disappear after about 1000 sheets
have been printed.
A A A A
Press { { { { Menu} } } } .
On Line Menu
Job Reset Form Feed
Power Error
The menu appears on the display.
Menu
Paper Input
B B B B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"List/Test Print", and then press
{ { { { Enter#} } } } .
Menu
List/Test Print
The menu for selecting the con-
tents to be test printed appears.
C C C C
Escape
#
Enter
Data In
D D D D
ZDJS001N
E E E E
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display the
"Config. Page", and then press
{ { { { Enter#} } } } .
List/Test Print
Config. Page
The following message appears
and the configuration page is
printed.
Printing...
Note
❒ If printing is not normal, check
to see if an error message ap-
pears on the display. If there is
an error message, see "Trouble-
shooting", Maintenance Guide.
Check the options.
Note
❒ For details about the configura-
tion page, see "Interpreting the
Configuration Page", Adminis-
trator Reference.
Press { { { { On Line} } } } .
"Ready" appears on the display.
Test Printing
2
23