Ricoh CL7000 Setup Manual page 98

Installing Options
B With the 2 tray finisher tray
laid horizontally, slide it in at a
slant until it stops.
4 C Fasten the finisher tray using a
short screw and the provided
screwdriver.
D Use the same steps (B B B B and C C C C )
to install the other 2 tray fin-
isher trays.
Note
❒ Be sure to return the provid-
ed screwdriver to its original
position on the inside of the
front cover.
86
V V V V
Put the finisher tray installed on
the duplex unit back in place.
A Lift the top.
ZDJP083J
B Lower slowly.
ZDJP084J
Note
❒ After finishing the installa-
tion, you can check the fin-
isher is installed properly:
Print the configuration page
from the "List/Test Print"
menu. If it is installed prop-
erly, you will see "2 Tray Fin-
i s h e r " a p p e a r i n t h e
"Options" list.
❒ If the Finisher is not installed
properly, repeat the proce-
dure from step
not install it properly even
after reinstallation, contact
your sales or service repre-
sentative.
Reference
p.23 "Test Printing"
ZHXH360J
ZHXH370J
A
. If you can-