Ricoh CL7000 Setup Manual page 21

Note
❒ The machine must be level within 5 mm, 0.2" from both front to rear and
left to right.
❒ To avoid possible build-up of ozone, locate this machine in a large well
ventilated room that has an air turnover of more than 30 m
❒ When you use this machine for a long time in a confined space without
good ventilation, you may detect an odd smell. To keep the workplace
comfortable, we recommend you keep it well ventilated.
❖ ❖ ❖ ❖ Environments to Avoid
Important
❒ Areas exposed to direct sunlight or strong light
❒ Dusty areas
❒ Areas with corrosive gases
❒ Areas that are excessively cold, hot, or humid
❒ Locations near air conditioners or humidifiers
❒ Locations near other electronic equipment
❒ Locations subject to frequent strong vibration
❖ ❖ ❖ ❖ Power Source
Connect the power cable to a power source of the following specification:
• 120 V, 60 Hz, 10 A or more
Where to Put the Printer
3
/hr/person.
2
9