Network Setup - Ricoh CL7000 Setup Manual

Preparing to Print
B Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Active Protocol", and then
press { { { { Enter #} } } } .

Network Setup:

Active Protocol
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"TCP/IP", and then press { { { { En-
ter #} } } } .
3
Active Protocol:
TCP/IP
D Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Ac-
tive", and then press { { { { Enter #} } } } .
TCP/IP:
*Active
Note
❒ * shows the current setting.
After about two seconds, the
display returns to the "Active
Protocol" setting screen.
E Set the rest of the protocols for
use.
F When all settings for protocols
are done, press { { { { Escape} } } } .
The "Network Setup" setting
screen appears.
D D D D
When you use this machine in
DHCP environment, proceed to
step H H H H . When you use this ma-
chine with a fixed IP address, you
must make the setting for the re-
quired item after setting DHCP to
Off. Proceed to step E E E E .
Important
❒ When DHCP is On, you cannot
make settings for the following
items:
• IP Address
• Subnet Mask
• Gateway Address
28
Note
❒ Consult your network adminis-
trator for information about
making network settings.
A Set DHCP to Off.
B Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "DH-
CP", and then press { { { { Enter #} } } } .
Network Setup:
DHCP
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Off", and then press { { { { Enter #} } } } .
The current IP address appears
on the display.
DHCP:
*Off
Note
❒ * shows the current setting.
After about two seconds, the
display returns to the "Network
Setup" setting screen.
D Set the printer IP address.
Note
❒ Confirm the IP address with
the network administrator.
E Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "IP
Address", and then press { { { { Enter #} } } } .
Network Setup:
IP Address
The currently selected IP ad-
dress appears.
Note
❒ When { { { { Enter #} } } } is pressed,
the cursor moves to the next
field.
❒ When { { { { U U U U } } } } or { { { { T T T T } } } } is kept
pressed for a few seconds,
the value changes in incre-
ments of 10.