IBM System x3550 M5 Type 5463 Installation And Service Manual page 471

Table of Contents

Advertisement

806f0507-0302ffff
[ProcessorElementName] has a Configuration Mismatch. (CPU 2)
Explanation: This message is for the use case when an implementation has detected a Processor Configuration
Mismatch has occurred.
May also be shown as 806f05070302ffff or 0x806f05070302ffff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0062
SNMP Trap ID: 40
Automatically notify Support: No
User response:
1.
Check the CPU LED. See more information about the CPU LED in Light path diagnostics.
2.
Check for a server firmware update. Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the
cluster solution before you update the code.
3.
Make sure that the installed microprocessors are compatible with each other.
4.
(Trained technician only) Reseat microprocessor n.
5.
(Trained technician only) Replace microprocessor n. (n = microprocessor number)
806f0507-2584ffff
[ProcessorElementName] has a Configuration Mismatch. (All CPUs)
Explanation: This message is for the use case when an implementation has detected a Processor Configuration
Mismatch has occurred.
May also be shown as 806f05072584ffff or 0x806f05072584ffff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0062
SNMP Trap ID: 40
Automatically notify Support: No
User response:
1.
Check the CPU LED. See more information about the CPU LED in Light path diagnostics.
2.
Check for a server firmware update. Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the
cluster solution before you update the code.
3.
Make sure that the installed microprocessors are compatible with each other.
4.
(Trained technician only) Reseat microprocessor n.
5.
(Trained technician only) Replace microprocessor n. (n = microprocessor number) One of the CPUs :
806f0507-0302ffff • 806f0507-2584ffff
Appendix A. Integrated management module 2.1 (IMM2.1) error messages
455

Advertisement

Table of Contents
loading

Table of Contents