IBM System x3550 M5 Type 5463 Installation And Service Manual page 167

PCI riser-card
assembly 3
2.5-inch hot-swap
rear hard disk
drive kit
Figure 63. 2.5-inch hot-swap rear hard disk drive kit installation
5. Tighten the screw to secure the rear hard disk drive kit to the chassis.
Screw
Figure 64. Screw location
6. Lift the air duct and connect the mini-SAS HD (12Gb) and power cables to the
rear hot-swap backplane.
2
1
Chapter 5. Removing and replacing components
151