IBM System x3550 M5 Type 5463 Installation And Service Manual page 367

Table of Contents

Advertisement

80070101-2c01ffff
Sensor [SensorElementName] has transitioned from normal to non-critical state. (ML2
OverTemp)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 800701012c01ffff or 0x800701012c01ffff
Severity: Warning
Alert Category: Warning - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 12
Automatically notify Support: No
User response: None
8007010d-2582ffff
Sensor [SensorElementName] has transitioned from normal to non-critical state. (RAID Vol
State)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 8007010d2582ffff or 0x8007010d2582ffff
Severity: Warning
Alert Category: Warning - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 60
Automatically notify Support: No
User response: None
8007010f-2201ffff
Sensor [SensorElementName] has transitioned from normal to non-critical state. (GPT Status)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 8007010f2201ffff or 0x8007010f2201ffff
Severity: Warning
Alert Category: Warning - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 60
Automatically notify Support: No
User response:
1.
Check the IBM support site for service bulletins or firmware updates that apply to this GPT error.
2.
Set the UEFI setting DISK GPT Recovery to Automatic.
3.
Replace the corrupt disk.
80070101-2c01ffff • 8007010f-2201ffff
Appendix A. Integrated management module 2.1 (IMM2.1) error messages
351

Advertisement

Table of Contents
loading

Table of Contents