IBM System x3550 M5 Type 5463 Installation And Service Manual page 231

SAS/SATA power
connector
SAS/SATA power cable
Figure 132. 4 x 3.5-inch simple-swap backplate assembly cable connection
4. Reinstall the hard disk drives and filler panels (see "Replacing simple-swap
hard disk drives" on page 146).
5. Reinstall the cover (see "Replacing the cover" on page 127).
6. Slide the server into the rack.
7. Reconnect the power cords and any cables that you removed.
8. Turn on the peripheral devices and the server.
Chapter 5. Removing and replacing components
SAS/SATA signal
cable
215