Firmware Update - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC
System Administrator

[3.1.485] Maintenance Menu

[3.1.486] Firmware Update

[3.1.487] In MegaRAC GUI, this wizard takes you through the
process of firmware up gradation. A reset of the box will auto-
matically follow if the upgrade is completed or cancelled. An
option to preserve configuration will be presented. Enable it, if
you wish to preserve configured settings through the upgrade.
WARNING!
!
[3.1.488] Please note that after entering update mode widgets,
other web pages and services will not work. All open widgets
will be closed automatically. If upgrade process is cancelled in
the middle of the wizard, the device will be reset.
Note:
[3.1.489] The firmware upgrade process is a crucial operation.
Make sure that the chances of a power or connectivity loss are
minimal when performing this operation.
Once you enter into Update Mode and choose to cancel the
firmware flash operation, the MegaRAC
This means that you must close the Internet browser and log
back onto the MegaRAC
other types of operations.
3-54
M G
AINTENANCE
®
card must be reset.
®
card before you can perform any
ROUP