QUANTA W Mainboard Series S210-MBT2W Technical Manual page 217

BMC
[3.1.267] PEF Management LAN Destina-
tion Page
[3.1.268] This page is used to configure the Event filter, Alert
Policy and LAN destination. A sample screenshot of PEF Man-
agement LAN Destination Page is given below.
[3.1.269] PEF Management LAN Destination
[3.1.270] The fields of PEF Management – LAN Destination
Tab are explained below.
[3.1.271] PEF Management - LAN Destination
I
TEM
Displays Destination number for the newly con-
LAN Destination
figured entry (read-only).
Destination type can be either an SNMP Trap or
an Email alert.
For Email alerts, the 3 fields - destination Email
address, subject and body of the message
needs to be filled. The SMTP server information
Destination Type
also has to be added - under
> SMTP
For SNMP Trap, only the destination IP address
has to be filled.
If Destination type is SNMP Trap, then enter the
IP address of the system that will receive the
alert. Destination address will support the follow-
ing:
Destination Address


If Destination type is Email Alert, then give the
email address that will receive the email.
These fields must be configured if email alert is
chosen as destination type. An email will be sent
to the configured email address in case of any
Subject & Message
severity events with a subject specified in sub-
ject field and will contain the message field's
content as the email body.
To save the new LAN destination and return to
Add
LAN destination list.
3-30
C
ONFIGURATION
D
ESCRIPTION
Configuration
.
IPv4 address format.
IPv6 address format.
G
ROUP