1. Manuals
  2. Brands
  3. QUANTA Manuals
  4. Server
  5. STRATOS S200 Series S200-X12TS
  6. Technical manual

QUANTA STRATOS S200 Series S200-X12TS Technical Manual

2-socket general purpose 1u server
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
STRATOS S200 Series
S200-X12TS
2-Socket General Purpose
1U Server
Technical Guide
Document Version: 1.2.0

Advertisement

Table of Contents
loading

Related Manuals for QUANTA STRATOS S200 Series S200-X12TS

Summary of Contents for QUANTA STRATOS S200 Series S200-X12TS

  • Page 1 STRATOS S200 Series S200-X12TS 2-Socket General Purpose 1U Server Technical Guide Document Version: 1.2.0...

  • Page 2: Table Of Contents

    ABLE OF ONTENTS ABLE OF ONTENTS About the Server Introduction Main Features ............... .1-1 Specifications .
  • Page 3 ABLE OF ONTENTS I/O LED Description ..............1-10 LAN LED .
  • Page 4 ABLE OF ONTENTS Removing a Power Supply Unit ............2-8 Installing a Power Supply Unit .
  • Page 5 ABLE OF ONTENTS Removing the Riser Assembly............2-22 Installing the Riser Assembly.
  • Page 6 ABLE OF ONTENTS Fixed Hard Disk Drives 2-37 Removing a Fixed Hard Disk Drive ............2-37 Installing a Fixed Hard Disk Drive .
  • Page 7 ABLE OF ONTENTS Keyboard Commands ..............3-2 Menu Selection Bar .
  • Page 8 ABLE OF ONTENTS FRU Information ..............3-35 BMC Network Configuration.
  • Page 9 ABLE OF ONTENTS Checkpoint Ranges ..............3-48 Standard Checkpoints .
  • Page 10 ABLE OF ONTENTS Platform Event ............... .4-4 Platform Event Filter.
  • Page 11 ABLE OF ONTENTS Server identify ..............4-14 Server Health Group .
  • Page 12 ABLE OF ONTENTS Maintenance Group ..............4-59 BMC Firmware Update.
  • Page 13 ABLE OF ONTENTS Installing the System Into the Rack ............6-3 Troubleshooting Troubleshooting Server Boot Issue Topics.
  • Page 14 ABLE OF ONTENTS Safety Warnings and Cautions ............9-1 Intended Application Uses .
  • Page 15 ABLE OF ONTENTS Electromagnetic Compatibility Notices 10-2 FCC Verification Statement (USA)............10-2 Europe (CE Declaration of Conformity) .
  • Page 16 ONVENTIONS Conventions Several different typographic conventions are used throughout this manual. Refer to the following examples for common usage. Bold type face denotes menu items, buttons and application names. Italic type face denotes references to other sections, and the names of the folders, menus, programs, and files. <Enter>...
  • Page 17 CRONYMS Acronyms EFINITION EFINITION A signal is deasserted when in the inactive state. Analog to Digital Active-low signal names have “_L” appended to the ACPI Advanced Configuration and Power Interface end of the signal mnemonic. Active-high signal names Deasserted have no “_L” suffix. To reduce confusion when referring Alerting Standard Forum to active-high and active-low signals, the terms one/ Active-high (positive true) signals are asserted when in...
  • Page 18 CRONYMS EFINITION EFINITION IPMI Intelligent Platform Management Interface Unit of electrical resistance In-Target Probe Power Distribution Board 1024 bytes. Platform Event Filtering Keyboard Controller Style Platform Event Paging Keyboard, Video, Mouse PERR Parity Error Local Area Network Power-On Hours Liquid Crystal Display POST Power-On Self Test Lower Critical Threshold...
  • Page 19 CRONYMS EFINITION Server Management Mode Server Management Software SNMP Simple Network Management Protocol Serial Over LAN UART Universal Asynchronous Receiver/Transmitter Upper Critical Threshold User Datagram Protocol UNCT Upper Non-Critical Threshold UNRT Upper Non-Recoverable Threshold Watchdog Timer Word 16-bit quantity XVIII...

  • Page 20: Important Safety Instructions

    AFETY NFORMATION Safety Information Important Safety Instructions Hazardous conditions, devices and cables: Hazardous elec- trical conditions may be present on power, telephone, and com- munication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and Read all caution and safety statements in this document before modems attached to the server before opening it.
  • Page 21 AFETY NFORMATION with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the board may bend or break.

  • Page 22: Revision History

    Copyright © 2014 Quanta Computer Inc. This publication, ufacturer to notify any person of such revision or changes.
  • Page 23 EVISION ISTORY About the Book This manual is written for system technicians who are responsi- ble for troubleshooting, upgrading, and repairing the server chassis. This document provides an overview of the hardware features of the chassis, troubleshooting information, and instructions on how to add and replace components of the multi-node server series.
  • Page 24 About the Server Chapter 1...

  • Page 25: Introduction

    BOUT THE ERVER NTRODUCTION 1.1. Introduction Main Features S200-X12TS Specification (Continued) PECIFICATION ESCRIPTION Quanta STRATOS S200-X12TS is a 2-socket general purpose 2.5” 1 to 1 SKU ® ® 1U server, supporting two Intel Xeon processor E5-2400 / LSI SAS controller ...
  • Page 26 ECC RDIMM slots per node, up to 384 GB  file x8 slot PCIe Expansion Slot 2.5” 1 to 1 SKU (1) PCIe x8 G2 Quanta LSISAS/RAID Mezza-  nine card slot (10) 2.5" hot-plugable HDD(Mezz *8+ AHCI  *2 6Gb) + (2) fixed SATAII (AHCI 3Gb) or 2.5”...
  • Page 27 + LSI RAID 6 Key for RAID 0/1/10/5/6/ 50/60 (optional) ® (2) Intel Powerville I350GbE RJ45 ports  Network (1) Quanta 10GbE SFP+ dual port mezza-  nine card (optional) (1) Dedicated 10/100 BASE-T RJ45 manage- Management Port ment port per node Integrated Graphics Aspeed AST2300 8MB DDR3 Video memory (2) USB 2.0 ports...

  • Page 28: Package Contents

    BOUT THE ERVER ACKAGE ONTENTS 1.2. Package Contents The following list includes the package components: 1U chassis system  Mainboard modules  2 x Processor heatsinks  Power supply  Power cord (optional)  CD (technical guide included)  Rail kit ...

  • Page 29: A Tour Of The System

    BOUT THE ERVER OUR OF THE YSTEM 1.3. A Tour of the System System Overview 2.5” SKU System Component Description ESCRIPTION The S200-X12TS is available as a 2.5” or a 3.5” form factor. PSUs 2x power supply units (PSU) 2.5” or 3.5” HDD 2.5”...

  • Page 30: System Front Features

    BOUT THE ERVER YSTEM RONT EATURES 3.5” HDD System 3.5” SKU System Component Description (Continued) ESCRIPTION Chassis System chassis 3.5 HDDs 3.5” hard disk drive (HDD) cage System fan (4) System fan modules MB module Mainboard module System Front Features Configuration 2.5”...

  • Page 31: Control Panel

    BOUT THE ERVER YSTEM RONT EATURES Control Panel 3.5” HDD Configuration 2.5” HDD SKU Control Panel 3.5” HDD Configuration System Configuration ESCRIPTION Control Panel Control system 2.5” HDD SKU Control Panel Features HDD Bays HDDs arrays 2.5” HDD SKU Control Panel Features ESCRIPTION Amber Blinking: Critical failure: fan, voltage, tempera-...
  • Page 32 BOUT THE ERVER YSTEM RONT EATURES 2.5” HDD SKU Control Panel Features (Continued) 3.5” HDD SKU Control Panel Features (Continued) ESCRIPTION ESCRIPTION Green On Reset But- Base system On ton with Push button to Reset system Based on System Off, Push Button to Power But- PSU and System On ton with LED...

  • Page 33: System Rear Features

    BOUT THE ERVER YSTEM EATURES System Rear Features I/O Features Configuration System Rear I/O Features S200-X12TS System I/O Features System Rear Configuration EATURE ESCRIPTION System Rear Configuration 10GbE SFP+ mezzanine Port Optional ESCRIPTION Power supply unit Main Power Sup- Connect serial devices to this Main power supply unit (PSU) Serial port ply Unit...

  • Page 34: Power Sub-System

    BOUT THE ERVER OWER YSTEM Power Sub-System LED Status Definitions I/O LED Description I/O LED Description - 1GbE LAN ONDITI ESCRIPTIO OLOR PSU Description Unit A system can have two power supply units (PSU). The primary Blue selected for PSU and a redundant backup. The redundant backup is identification Identification LED optional.

  • Page 35: Led Status Definitions

    LED S BOUT THE ERVER TATUS EFINITIONS I/O LED Description - 1GbE LAN (Continued) I/O LED Description - 1GbE LAN (Continued) ONDITI ESCRIPTIO ONDITI ESCRIPTIO OLOR OLOR Green LAN Link Green LAN Link LAN access LAN access (off when (off when Link/Act Green Black...
  • Page 36 LED S BOUT THE ERVER TATUS EFINITIONS I/O LED Description - 10GbE LAN (Continued) I/O LED Description - 10GbE LAN ONDITI ESCRIPTIO ONDITI ESCRIPTIO OLOR OLOR Green LAN Link Unit Blue selected for LAN access identification (off when Identification LED Link/Act Green Black...

  • Page 37: Lan Led

    LED S BOUT THE ERVER TATUS EFINITIONS LAN LED I/O LED Description - 10GbE LAN (Continued) ONDITI ESCRIPTIO OLOR The system mainboard has one I350GbE Ethernet controller and two 1GbE ports. Each RJ45 connector has two built-in Green LAN Link LEDs.

  • Page 38: Control Panel Led

    LED S BOUT THE ERVER TATUS EFINITIONS Control Panel LED 3.5” HDD SKU Control Panel LED (Continued) 3.5 SKU LED F UNCTION AND EHAVIOR 3.5” HDD SKU Control Panel LED OLOR ONDITION ESCRIPTION Hard disk drive access 3.5” HDD SKU Control Panel LED Green Blinking (only on board SATA...
  • Page 39 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU Control Panel LED 2.5” HDD SKU Control Panel LED (Continued) 3.5 SKU LED F UNCTION AND EHAVIOR 2.5” HDD SKU Control Panel LED OLOR ONDITION ESCRIPTION 3.5 SKU LED F UNCTION AND EHAVIOR Green...

  • Page 40: Hdd Led

    LED S BOUT THE ERVER TATUS EFINITIONS HDD LED Note: LSI 9210-8i and SAS2008, SAS2308 Mezzanine card no  3.5” HDD SKU One to One AMI LED Behav- RAID mode, only support Simple LED pattern. If SW RAID cards no crate RAID mode, only support Simple ...
  • Page 41 LED S BOUT THE ERVER TATUS EFINITIONS 3.5” HDD SKU One to One Backplane LED Behavior The 4-disk backplane supports up to 4 drive slots and provides the LEDs that are used to light the HDD status indicators as in the fol- lowing table.
  • Page 42 LED S BOUT THE ERVER TATUS EFINITIONS 3.5” HDD SKU One to One Backplane LED Pattern LED P NE TO ACKPLANE ATTERN (RAID S EVICE TATES TATES (RAID EVICE TATES LED (G LED (R LED (D DENTIFICAITON TATUS REEN AULT CTIVE REEN TATES...
  • Page 43 LED S BOUT THE ERVER TATUS EFINITIONS Note: The LED pattern follows the DCS LED pattern spec. design.  The LED pattern is only for MegaRAID card.  SAS2008, SAS2308 Mezzanine card no support Full LED, so only support Simple LED mode. ...
  • Page 44 TATUS EFINITIONS 2.5” HDD SKU One to One Backplane (2.5”x10 SKU) Note: Applies to Quanta SAS2008 and SAS2108 Mezzanine card.  The pattern only on the RAID mode.  The backplane included AMI 9086 Backplane Controller, LED decode from SGPIO singles.
  • Page 45 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU One to One Backplane LED Pattern (2.5” x10 SKU) (Continued) LED P NE TO ACKPLANE ATTERN (RAID S EVICE TATES TATES (RAID EVICE TATES LED (G LED (R LED (D DENTIFICAITON TATUS REEN...
  • Page 46 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU Expander LED Mode (2.5” x10 SKU) The 10-disks backplane supports up to 10 drive slots and provides the LEDs that are used to light the HDD status indicators as shown in the following table. 2.5”...
  • Page 47 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU Expander LED Mode (2.5” x10 SKU) LED P XPANDER ATTERN (RAID S HDD A EVICE TATES TATES CCESS SES-2 TATUS AULT (RAID S LED (D DENTIFICAITON EVICE TATES TATES CTIVE REEN OMMAND REEN...
  • Page 48 LED S BOUT THE ERVER TATUS EFINITIONS 2.5” HDD SKU Expander LED Mode (2.5” x10 SKU) LED P XPANDER ATTERN (RAID S HDD A EVICE TATES TATES CCESS SES-2 TATUS AULT (RAID S LED (D DENTIFICAITON EVICE TATES TATES CTIVE REEN OMMAND REEN...

  • Page 49: Psu Led

    LED S BOUT THE ERVER TATUS EFINITIONS PSU LED 2.5” HDD SKU Simple LED Mode (2.5” x10 SKU) For LSI 9210-8i and SAS2008, SAS2308 mezzanine card. 2.5” HDD SKU Simple LED Mode LED P IMPLE ATTERN HDD A EVICE TATES CCESS PSU LED TATUS...

  • Page 50: Installing Hardware

    Installing Hardware Chapter 2...

  • Page 51: Safety Measures

    NSTALLING ARDWARE AFETY EASURES 2.1. Safety Measures WARNING! WARNING! Wear a grounded wrist strap. If none are available, discharge Always ask for assistance to move or lift the system. any personal static electricity by touching the bare metal chassis of the server case, or the bare metal body of any other grounded device.

  • Page 52: Hard Disk Drives

    2.5” H NSTALLING ARDWARE RIVES 2.2. 2.5” Hard Disk Drives 2. Pull the HDD tray handle open. WARNING! To prevent damage to the system, only use X5 HDD trays. Removing a 2.5” Swappable HDD Assembly Removing HDD Assembly 1. Press the tray handle button. 3.

  • Page 53: Removing A 2.5" Swappable Hdd From An Hdd Tray

    2.5” S HDD T NSTALLING ARDWARE EMOVING A WAPPABLE FROM AN Removing a 2.5” Swappable HDD Installing a 2.5” Swappable HDD from an HDD Tray Assembly Installing HDD Assembly 1. Insert the HDD assembly into the system. Make sure the hard drive is fully inserted.

  • Page 54: Installing A 2.5" Swappable Hdd Into An Hdd Tray

    2.5” S HDD T NSTALLING ARDWARE NSTALLING A WAPPABLE INTO AN Installing a 2.5” Swappable HDD into an HDD Tray Assembling HDD Tray 1. Install the HDD into the HDD tray. 2. Secure the HDD to the HDD tray with screws.

  • Page 55: Removing A 3.5" Swappable Hdd Assembly

    3.5” S HDD A NSTALLING ARDWARE EMOVING A WAPPABLE SSEMBLY Removing a 3.5” Swappable HDD Removing a 3.5” Swappable HDD Assembly from an HDD Tray WARNING! Note: To prevent damage to the system, only use X5 HDD trays. The 3.5” hard disk tray supports both 2.5” and 3.5” hard disks. Disassembling 3.5”...

  • Page 56: Installing A 3.5" Swappable Hdd Assembly

    3.5” S HDD A NSTALLING ARDWARE NSTALLING A WAPPABLE SSEMBLY Installing a 3.5” Swappable HDD Disassembling 2.5” HDD assembly: Assembly Installing HDD Assembly 1. Insert the HDD assembly into the system. Make sure the hard drive is fully inserted. 2. Push the tray handle closed. Disassembling 2.5”...

  • Page 57: Installing A 3.5" Swappable Hdd Into An Hdd Tray

    3.5” S HDD T NSTALLING ARDWARE NSTALLING A WAPPABLE INTO AN Installing a 3.5” Swappable HDD Assembling 2.5” HDD assembly: into an HDD Tray Note: The 3.5” hard disk tray supports both 2.5” and 3.5” hard disks. Assembling 3.5” HDD assembly: Assembling 2.5”...

  • Page 58: Power Supply Unit

    NSTALLING ARDWARE OWER UPPLY 2.3. Power Supply Unit CAUTION! DISCONNECT THE POWER SUPPLY UNIT FROM THE POWER SOURCE BEFORE REMOVING PSU AILURE TO DO SO COULD RESULT IN DAM AGE TO THE EQUIPMENT OR PERSONAL INJURY Note: The redundant power supply unit can be replaced without shut- ting down the system.

  • Page 59: Top Cover

    NSTALLING ARDWARE OVER 2.4. Top Cover Opening the Top Cover Closing the Top Cover 4. Press the release button(s) (B) and slide the top cover 1. Place the top cover (A) on the chassis. (A). 2. Slide the top cover into place. 5.

  • Page 60: Processor Heat Sinks

    NSTALLING ARDWARE ROCESSOR INKS 2.5. Processor Heat Sinks The CPU0 and CPU1 have different types of heat sinks. Instructions in this section discuss both types of heat sinks. Removing a Heat Sink WARNING! The heat sink remains hot after the system has been powered down.

  • Page 61: Installing A Heat Sink

    NSTALLING ARDWARE NSTALLING A Installing a Heat Sink Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9. 1. Place the heat sink on the processor. Removing the Heat Sink (CPU1) 2. Remove the heat sink. Installing the Heat Sink (CPU0) 2-11...
  • Page 62 NSTALLING ARDWARE NSTALLING A Installing the Heat sink (CPU1) 2. Secure the heat sink with the captive screw(s) in the order shown. 2-12...

  • Page 63: Processors

    NSTALLING ARDWARE ROCESSORS 2.6. Processors Removing a Processor 2. Push down as shown in image to lift the processor bracket. WARNING! The processor remains hot after the system has been powered down. Allow sufficient time to cool before handling system compo- nents.

  • Page 64: Installing A Processor

    NSTALLING ARDWARE NSTALLING A ROCESSOR Installing a Processor 3. Remove the processor. 1. Pull the locking lever of the processor socket out and up as shown. Removing Processor Release Locking Lever 2-14...
  • Page 65 NSTALLING ARDWARE NSTALLING A ROCESSOR 2. Push down as shown in image to lift the processor 5. Locate the indents (C) on processor and corresponding bracket. tab (D) on socket. 6. Install the processor. Note: Use the socket cover to protect the socket when the socket is empty.
  • Page 66 NSTALLING ARDWARE NSTALLING A ROCESSOR 7. Replace the processor bracket and locking lever to lock the processor in place. Replacing Processor Bracket 8. Repeat steps for the second processor. 2-16...

  • Page 67: Memory Modules

    NSTALLING ARDWARE EMORY ODULES 2.7. Memory Modules WARNING! Mainboard is supplied with all DIMM slots populated with dummy DIMMs for proper air flow. When installing and replac- ing memory modules, only remove those dummy DIMMs that are to be directly replaced. All DIMM slots must be occupied at all times by either a memory module or dummy DIMM.

  • Page 68: Removing Memory Modules

    NSTALLING ARDWARE EMOVING EMORY ODULES Removing Memory Modules CPU0 Memory Module Population Rules CPU0 DIMM UMBER OF CAUTION! ANDLE THE MEMORY MODULE BY THE EDGES AT ALL TIMES WARNING! Memory modules remain hot after the system is powered down. Allow sufficient time for the memory modules to cool before handling system components.

  • Page 69: Installing Memory Modules

    NSTALLING ARDWARE NSTALLING EMORY ODULES Installing Memory Modules 1. Press down on the two memory module slot levers (A). The memory module partially ejects. Push the memory module firmly into the memory module slot. The locking latches should automatically close over the edges of the memory board when fully inserted into the slot.

  • Page 70: Memory Support List

    NSTALLING ARDWARE EMORY UPPORT Memory Support List Note: The data listed in the table is for reference only. Please see AVL in download page on www.QuantaQCT.com for more informa- tion. RDIMM Support ) & V PEED OLTAGE ALIDATED BY LOT PER ) &...

  • Page 71: Memory Configuration By Cpu

    NSTALLING ARDWARE EMORY ONFIGURATION BY Memory Configuration by CPU RDIMM Population Configuration Within a Channel for Two Slots per Channel ONFIGURATION DIMM1 DIMM0 PEED NUMBER DDR3- 1600, 1333, Empty Single-rank 1066 DDR3- 1600, 1333, Emptu Dual-rank 1066 DDR3-800 Empty Quad-rank DDR3- 1600, 1333, Single-rank...

  • Page 72: Riser Assembly

    NSTALLING ARDWARE ISER SSEMBLY 2.8. Riser Assembly Removing the Riser Assembly Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9. 1. Remove screw(s) from the assembly. Riser Board Screw(s) 4. Remove linking board from riser assembly. Removing Riser Assembly Screw(s) 2.

  • Page 73: Installing The Riser Assembly

    NSTALLING ARDWARE NSTALLING THE ISER SSEMBLY Installing the Riser Assembly 3. Align the assembly with the guide slot in the chassis. Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9. 1. Align linking board screw hole(s) with riser assembly hole(s).

  • Page 74: Expansion Cards

    NSTALLING ARDWARE XPANSION ARDS 2.9. Expansion Cards Removing a Expansion Card Installing the Expansion Card Prerequisite: Prerequisite: Remove the top cover. See Opening the Top Cover on Remove the top cover. See Opening the Top Cover on page 2-9. page 2-9. 1.

  • Page 75: Removing A 10Gbe Sfp+ Mezzanine Card Assembly

    NSTALLING ARDWARE XPANSION ARDS Removing a 10GbE SFP+ Mezza- 3. Remove screw(s) securing mezzanine card assembly cover. nine Card Assembly Prerequisite: Remove the top cover. See Opening the Top Cover . 1. Remove screw(s) securing the card assembly. Removing Mezzanine Card Assembly Cover Screw(s) 4.

  • Page 76: Installing A 10Gbe Sfp+ Mezzanine Card Assembly

    NSTALLING ARDWARE XPANSION ARDS Installing a 10GbE SFP+ Mezza- 3. Install assembly into the chassis. nine Card Assembly Prerequisite: Remove the top cover. See Opening the Top Cover . 1. Align the screw hole(s) on the mezzanine card with the hole(s) on the assembly cover.

  • Page 77: Removing A Sas/Raid Mezzanine Card Assembly

    NSTALLING ARDWARE XPANSION ARDS Removing a SAS/RAID Mezza- 3. Remove screw(s) securing the linking board to the card assembly. nine Card Assembly Prerequisite: Remove the top cover. See Opening the Top Cover . 1. Remove screw(s) securing the card assembly. Removing Linking Board from Assembly 4.

  • Page 78: Installing A Sas/Raid Mezzanine Card Assembly

    NSTALLING ARDWARE XPANSION ARDS Installing a SAS/RAID Mezza- 5. Remove screw(s) securing SAS/RAID card to assembly cover. nine Card Assembly Prerequisite: Remove the top cover. See Opening the Top Cover . 1. Align the screw hole(s) on the SAS/RAID card with the hole(s) on the assembly cover.
  • Page 79 NSTALLING ARDWARE XPANSION ARDS 3. Connect linking board on the SAS/RAID card. 5. Install assembly on the chassis. Installing Linking Board on Assembly Installing SAS/RAID Card Assembly Screw(s) 4. Secure linking board to the card assembly with screw(s). 6. Secure the card assembly to the chassis with screw(s). 2-29...

  • Page 80: Mainboard Module

    NSTALLING ARDWARE AINBOARD ODULE 2.10. Mainboard Module Removing a Mainboard Module 1. Remove screws securing the mainboard to the chassis. CAUTION! PLUG MUST BE REMOVED BEFORE REMOVING THE MAINBOARD MODULE Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9.

  • Page 81: Installing A Mainboard Module

    NSTALLING ARDWARE NSTALLING A AINBOARD ODULE Installing a Mainboard Module 2. Lift mainboard at an angle to release the connectors from the slots (B) on rear panel. Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9. 1.
  • Page 82 NSTALLING ARDWARE NSTALLING A AINBOARD ODULE 2. Align the mainboard opening with the chassis guide pin (A). Aligning to the Chassis Guide Pin 3. Secure mainboard to chassis with screw(s). 2-32...

  • Page 83: Intelligent Battery Backup Unit

    NSTALLING ARDWARE NTELLIGENT ATTERY ACKUP 2.11. Intelligent Battery Backup Unit A single iBBU provides backup functionality for a single module. To provide backup functionality for multiple modules, each module must be connected to an iBBU module. Installing an iBBU 3. Align the bracket and iBBU assembly. Prerequisite: Remove the top cover.

  • Page 84: Removing An Ibbu

    NSTALLING ARDWARE EMOVING AN I Removing an iBBU 5. Secure the iBBU bracket to the chassis with screw(s). Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9. Disconnect the iBBU cable from the card. 2. Disconnect the iBBU cable from the battery. 3.
  • Page 85 NSTALLING ARDWARE EMOVING AN I 5. Remove screw(s) securing the bracket to the iBBU assembly. Removing iBBU Assembly from Bracket 6. Remove assembly from the bracket. 2-35...

  • Page 86: Fixed Hard Disk Drive Bracket

    NSTALLING ARDWARE IXED RIVE RACKET 2.12. Fixed Hard Disk Drive Bracket Removing a Fixed Hard Disk Installing a Fixed Hard Disk Drive Bracket Drive Bracket Prerequisite: Prerequisite: Remove the top cover. See Opening the Top Cover on Remove the top cover. See Opening the Top Cover on page 2-9.

  • Page 87: Fixed Hard Disk Drives

    NSTALLING ARDWARE IXED RIVES 2.13. Fixed Hard Disk Drives Removing a Fixed Hard Disk 2. Remove the HDD assembly from the chassis. Drive 3. Remove the screw(s) securing the HDD support bracket to the HDD. Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9.

  • Page 88: Installing A Fixed Hard Disk Drive

    NSTALLING ARDWARE NSTALLING A IXED RIVE Installing a Fixed Hard Disk 3. Position the HDD assembly over the bracket with the con- nectors facing the fan assembly.. Drive Connectors Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9.

  • Page 89: Fan

    NSTALLING ARDWARE 2.14. Fan The system has a fan cage, including three fan modules and a 2. Remove the screw(s). single fan module. The instructions in this section include removal and installation procedures for the fan cage and for the single fan module.

  • Page 90: Installing A Fan Cage

    NSTALLING ARDWARE NSTALLING A Installing a Fan Cage Prerequisite: Remove the top cover. See Opening the Top Cover on page 2-9. 1. Align the fan cage to the screw hole(s) on the chassis. 2. Install and secure the screw(s). Connecting Cables Removing a Single Fan Module Prerequisite: Remove the top cover.

  • Page 91: Installing A Single Fan Module

    NSTALLING ARDWARE NSTALLING A INGLE ODULE 2. Release the fan module from the pin(s) and remove. 2. Align the fan module with the pin(s) on the chassis. 3. Install the fan module to the pin(s). Releasing Fan Module Installing Fan Module Installing a Single Fan Module 4.

  • Page 92: Air Duct

    NSTALLING ARDWARE 2.15. Air Duct Removing the Air Duct Installing the Air Duct 1. Remove the air duct from the chassis. WARNING! Air ducts are needed for the proper cooling of the system. To pre- vent damage to the system, when installing the air duct, make Middle Bracket sure the arrow on top of the air duct points towards the rear panel of the mainboard module.

  • Page 93: Cable Routing

    NSTALLING ARDWARE ABLE OUTING 2.16. Cable Routing The following diagram illustrates the cable routing for 3.5” HDD The following diagram illustrates the RAID mezzanine card SKU. cable routing for 3.5” HDD SKU. HDD 0 HDD 4 HDD 5 HDD 6 HDD 7 HDD 2 HDD 3...
  • Page 94 NSTALLING ARDWARE ABLE OUTING The following diagram illustrates the cable routing for 2.5” HDD The following diagram illustrates the RAID mezzanine card SKU. cable routing for 2.5” HDD SKU. HDD 0 HDD 1 HDD 2 HDD 3 HDD 2 HDD 3 Port 0~3 INT_HDD_0 Port 0~3...

  • Page 95: Bios

    BIOS Chapter 3...

  • Page 96: Bios Setup Utility

    BIOS BIOS S ETUP TILITY 3.1. BIOS Setup Utility Setup Page Layout The BIOS Setup utility is provided to perform system configura- tion changes and to display current settings and environment information. The BIOS Setup utility stores configuration settings in system The setup page layout is sectioned into functional areas.

  • Page 97: Entering Bios Setup

    BIOS BIOS S NTERING ETUP with a value field. This field contains user-selectable parame- BIOS Setup Page Layout (Continued) ters. Depending on the security option chosen and in effect by the password, a menu feature's value may or may not be UNCTIONAL ESCRIPTION changeable.
  • Page 98 BIOS EYBOARD OMMANDS Keyboard Commands (Continued) Keyboard Commands (Continued) PTION ESCRIPTION PTION ESCRIPTION The up arrow is used to select the previous Pressing <F8> causes the following to appear: Select value in a pick list, or the previous option in a ↑...

  • Page 99: Menu Selection Bar

    BIOS ELECTION Server Platform Setup Utility Keyboard Commands (Continued) Screens PTION ESCRIPTION Pressing <F10> causes the following message to appear: The sections below describe the screens available for the con- figuration of a server platform. In these sections, tables are used to describe the contents of each screen.

  • Page 100: Main Screen

    BIOS CREEN Main Screen Pressing <ESC> will discard the changes and boot the system according to the boot order set from the last boot. The Main screen is the screen that is first displayed when BIOS Setup is entered, unless an error has occurred. If an error has occurred, the Error Manager screen will be displayed instead.
  • Page 101 BIOS CREEN Main Screen Fields (Continued) Main Screen Fields ETUP PTIONS OMMENTS ETUP PTIONS OMMENTS Access Information only. Displays the BIOS Ven- Information only. Displays the Level Access Level. BIOS Vendor. Core Ver- Information only. Displays the sion AMI BIOS Core version. Information only.

  • Page 102: Advanced Screen

    BIOS DVANCED CREEN Advanced Screen Advanced Screen ETUP PTIONS OMMENTS The Advanced screen provides an access point to configure PCI Subsys- PCI, PCI-X and PCI several options. On this screen, the user selects the option that tem Settings Express Settings. is to be configured.

  • Page 103: Pci Screen

    BIOS DVANCED CREEN PCI Screen PCI Subsystem Settings Screen ETUP PTIONS OMMENTS The PCI Screen provides fields to configure PCI add-in cards, Change PCI the onboard NIC controllers, and video options. To access this PCI Express Express Devices screen from the Main screen, select Advanced | PCI. Settings Settings.
  • Page 104 BIOS DVANCED CREEN PCI Express Settings Screen PCI Express Settings Fields ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. [Auto] Main Advanced Chipset Server Mgmt Boot Security Save & Exit [128 Bytes] PCI Express Device Settings set Maximum Payload of PCI Set Maximum Payload of [256 Bytes]...

  • Page 105: Whea Support Screen

    BIOS DVANCED CREEN WHEA Support Screen WHEA Support Fields ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Enable or disable Win- Main Advanced Chipset Server Mgmt Boot Security Save & Exit dows Hardware Error WHEA Support [Enabled] Enable or disable Windows Architecture.

  • Page 106: Processor Configuration Screen

    BIOS DVANCED CREEN Processor Configuration Screen Processor Configuration Fields ETUP PTIONS OMMENTS The Processor screen provides a place for the user to view the Socket 0 processor core frequency, system bus frequency, and enable or Socket specific CPU Infor- disable several processor options. The user can also select an CPU Information.
  • Page 107 BIOS DVANCED CREEN Processor Configuration Fields (Continued) Processor Configuration Fields (Continued) ETUP PTIONS OMMENTS ETUP PTIONS OMMENTS [All] Enable prefetcher For 6-cores Pro- of next L1 line Number of cores to cessor display All, DCU IP [Disabled] Active Pro- based upon enable in each pro- 1, 2, 4.
  • Page 108 BIOS DVANCED CREEN Socket 0 CPU Information Screen Socket 0 CPU Information Fields (Continued) ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Information only. Main Advanced Chipset Server Mgmt Boot Security Save & Exit Microcode Displays the Micro- Patch Socket 0 CPU Information...

  • Page 109: Cpu Power Management Configuration

    BIOS DVANCED CREEN CPU Power Management Configuration Socket 0 CPU Information Fields (Continued) Screen ETUP PTIONS OMMENTS Information only. L2 Cache Displays the size of Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Server Mgmt Boot Security Save &...
  • Page 110 BIOS DVANCED CREEN CPU Power Management Configuration Fields (Continued) CPU Power Management Configuration Fields (Continued) ETUP PTIONS OMMENTS ETUP PTIONS OMMENTS Only appears when Please refer SNB [Disabled] Enable/Disable EIST Power Technology Long dura- Long duration BWG Section Intel SpeedStep. [Enabled] is set to [Custom].

  • Page 111: Runtime Error Logging Screen

    BIOS DVANCED CREEN Runtime Error Logging Screen Runtime Error Logging Fields (Continued) ETUP PTIONS OMMENTS Enable/Disable Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. [Disabled] ECC Error Main Advanced Chipset Server Mgmt Boot Security Save & Exit ECC Error Log- Logging [Enabled] ging.

  • Page 112: Sata Controller Screen

    BIOS DVANCED CREEN SATA Controller Screen SATA Controller Configuration Fields ETUP PTIONS OMMENTS The SATA Controller screen provides fields to configure SATA [Disabled] hard disk drives. It also provides information on the hard disk Select SATA Type [AHCI (1) AHCI Mode. (2) drives that are installed.

  • Page 113: Sas Configuration Screen

    BIOS DVANCED CREEN SAS Configuration Screen SAS Configuration Fields (Continued) ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Information only. Main Advanced Chipset Server Mgmt Boot Security Save & Exit SCU_1 Displays the device SAS Configuraion on SCU Port 1.

  • Page 114: Usb Configuration Screen

    BIOS DVANCED CREEN USB Configuration Screen USB Configuration Fields ETUP PTIONS OMMENTS The USB Configuration screen provides fields to configure the Information only. Dis- USB controller options. play all of the USB Devices: devices attached. To access this screen from the Main screen, select Advanced | Enables Legacy USB Configuration.

  • Page 115: Super I/O Configuration Screen

    BIOS DVANCED CREEN Super I/O Configuration Screen Super I/O Configuration Fields ETUP PTIONS OMMENTS The Serial Ports screen provides fields to configure the Serial Information only. Port [COM Port]. Super IO Display Super IO Chip Chip. To access this screen from the Main screen, select Advanced | Set Parameters of Super IO Configuration.

  • Page 116: Onboard Device Configuration Screen

    BIOS DVANCED CREEN Onboard Device Configuration Screen Serial Port Configuration Screen Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Server Mgmt Boot Security Save & Exit Main Advanced Chipset...

  • Page 117: Console Redirection Screen

    BIOS DVANCED CREEN Console Redirection Screen Onboard Device Configuration Fields ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. [Disabled] Main Advanced Chipset Server Mgmt Boot Security Save & Exit [Enabled Console Redirection Enable or With PXE] COM0 Disable.

  • Page 118: Console Redirection Settings

    BIOS DVANCED CREEN Console Redirection Settings Console Redirection Fields (Continued) ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. The settings spec- Main Advanced Chipset Server Mgmt Boot Security Save & Exit ify how the host COM0 Emulation: ANSI: Extended computer and the...
  • Page 119 BIOS DVANCED CREEN Console Redirection Settings Fields (Continued) Console Redirection Settings Fields ETUP PTIONS OMMENTS ETUP PTIONS OMMENTS A parity bit can be Emulation: ANSI: sent with the data Extended ASCII bits to detect some char set. VT100: transmission ASCII char set. errors.

  • Page 120: Chipset Screen

    BIOS HIPSET CREEN Chipset Screen Console Redirection Settings Fields (Continued) ETUP PTIONS OMMENTS Flow control can prevent data loss The Chipset screen provides an access point to configure sev- from buffer over- eral options. On this screen, the user selects the option that is flow.

  • Page 121: North Bridge Screen

    BIOS HIPSET CREEN North Bridge Screen Chipset Fields ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. North Bridge North Bridge Main Advanced Chipset Server Mgmt Boot Security Save & Exit Parameters. Intel(R) VT for Directed I/O Configuration Intel(R) VT for Directed I/O Configuration South Bridge...
  • Page 122 BIOS HIPSET CREEN North Bridge Configuration Fields (Continued) North Bridge Configuration Fields (Continued) ETUP PTIONS OMMENTS ETUP PTIONS OMMENTS Information only. If unsupported Total Memory Displays the Total memory mode is Memory. selected. BIOS will use “Independent” Information only. as current memory Current Displays the Cur- mode during next...
  • Page 123 BIOS HIPSET CREEN Intel(R) VT-d Screen Intel(R) VT-d Fields (Continued) ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Enabled/Disabled Main Advanced Chipset Server Mgmt Boot Security Save & Exit Coherency [Disabled] VT-d Engine Intel(R) VT-d [Enabled] Enable/Disable Intel(R) Support...

  • Page 124: South Bridge Screen

    BIOS HIPSET CREEN South Bridge Screen South Bridge Configuration Fields (Continued) ETUP PTIONS OMMENTS Enabled/Disabled Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Server Mgmt Boot Security Save & Exit onboard SATA Onboard [Disabled] RAID option rom if Enable/Disable Patsburg SATA RAID PCH Information...

  • Page 125: Usb Configuration

    BIOS HIPSET CREEN USB Configuration USB Configuration Fields (Continued) ETUP PTIONS OMMENTS Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Disable the EHCI Enabled/Disabled Main Advanced Chipset Server Mgmt Boot Security Save & Exit EHCI Con- [Disabled] Controller would USB EHCI Control- USB Configuration Enable/Disable ALL USB...

  • Page 126: Me Subsystem Screen

    BIOS HIPSET CREEN ME Subsystem Screen ME Subsystem Fields (Continued) ETUP PTIONS OMMENTS Information only. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. ME Vendor Main Advanced Chipset Server Mgmt Boot Security Save & Exit Displays the ME Label Vendor Label.

  • Page 127: Server Management Screen

    BIOS ERVER ANAGEMENT CREEN Server Management Screen Server Management Configuration Options ETUP OMMENTS Information only. BMC Self The Server Management screen displays information of the Displays theBMC Test Status Self Test Status. BMC and allows the user to configure desired settings. Information only.
  • Page 128 BIOS ERVER ANAGEMENT CREEN Server Management Configuration (Continued) Server Management Configuration (Continued) Options Options ETUP OMMENTS ETUP OMMENTS If enabled, starts Press <Enter> to View FRU BIOS timer which view FRU informa- information can only be shut off tion. by Intel Manage- BMC net- Configure BMC ment Software...

  • Page 129: System Event Log Screen

    BIOS ERVER ANAGEMENT CREEN System Event Log Screen System Event Log Fields (Continued) ETUP PTIONS OMMENTS [Do Noth- Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Choose options for Main Advanced Chipset Server Mgmt Boot Security Save & Exit When SEL is ing] reactions to a full...

  • Page 130: Fru Information

    Server Mgmt Boot Security Save & Exit System Prod- Displays the Sys- uct Name tem Product FRU Information Name. System Manufacturer Quanta Information only. System Product Name S210-X22RQ System Ver- System Version Displays the Sys- System Serial Number sion tem Version.

  • Page 131: Bmc Network Configuration

    BIOS ERVER ANAGEMENT CREEN BMC Network Configuration FRU Information (Continued) ETUP PTIONS OMMENTS Chassiss Information only. Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Server Mgmt Boot Security Save & Exit Product Displays the Chas- Name sis Product Name.
  • Page 132 BIOS ERVER ANAGEMENT CREEN BMC Network Configuration (Continued) BMC Network Configuration (Continued) ETUP PTIONS OMMENTS ETUP PTIONS OMMENTS Information only. Disabled/Enabled Current BMC Displays the cur- IPv6 BMC LAN LAN Port [Disabled] rent BMC LAN channel function. State Port State. IPv6 Mode [Enabled] No Change option...

  • Page 133: Boot Option Screen

    BIOS PTION CREEN Boot Option Screen Boot Option Fields ETUP PTIONS OMMENTS Number of sec- Default = 5. The Boot Options screen displays any bootable media encoun- Setup onds to wait for The Time starts Prompt [<number>] setup activation tered during POST, and allows the user to configure desired counting when Timeout key.
  • Page 134 BIOS PTION CREEN Boot Option Fields (Continued) Boot Option Fields (Continued) ETUP PTIONS OMMENTS ETUP PTIONS OMMENTS Specifies the Boot Specifies the Boot CD/DVD Device Priority Only selectable USB KEY Device Priority Only selectable ROM Drive sequence from when this type Drive BBS sequence from when this type...

  • Page 135: Security Screen

    BIOS ECURITY CREEN Security Screen Security Configuration Fields ETUP PTIONS OMMENTS Administra- Set Setup Adminis- The Security screen provides fields to enable and set the user tor Password trator Password. and administrative password and to lockout the front panel but- User Pass- Set User Pass- tons so they cannot be used.

  • Page 136: Exit Screen

    BIOS CREEN Exit Screen Exit Fields ETUP PTIONS OMMENTS The Exit screen allows the user to choose to save or discard Discard Exit system setup the configuration changes made on the other screens. It also Changes without saving any provides a method to restore the server to the factory defaults and Exit changes.

  • Page 137: Loading Bios Defaults

    BIOS BIOS D OADING EFAULTS Loading BIOS Defaults Exit Fields (Continued) ETUP PTIONS OMMENTS Different mechanisms exist for resetting the system configura- [<Device Boot with Device tion to the default values. When a request to reset the system String 4>] <Device String 4>.

  • Page 138: Bios Update Utility

    BIOS BIOS U PDATE TILITY 3.2. BIOS Update Utility The flash ROM contains system initialization routines, the BIOS Onboard video BIOS, RAID BIOS, and other option  Setup Utility, and runtime support routines. The exact layout is ROMS for the devices embedded on the server board. subject to change, as determined by BIOS.

  • Page 139: Recovery Flow

    BIOS ECOVERY Recovery Flow Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Server Mgmt Boot Security Save & Exit Recovery WARNING ! BIOS Recovery mode has been detected Set this option to The BIOS has an embedded recovery technique in the 'boot reset NVRAM to Proceed with flash update default values...

  • Page 140: Clear Cmos

    BIOS CMOS LEAR 3. Move CMOS clear jumper back to pins 1-2. See Main- Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. board Jumpers . Main Advanced Chipset Server Mgmt Boot Security Save & Exit Recovery WARNING! System firmware is being updated. 4.

  • Page 141: Server Management

    BIOS ERVER ANAGEMENT 3.3. Server Management Serial Configuration Settings The BIOS supports many standard-based server management features and several proprietary features. The Intelligent Plat- form Management Interface (IPMI) is an industry standard and For optimal configuration of Serial Over LAN or EMP see the defines standardized, abstracted interfaces to platform man- BMC Specification.

  • Page 142: Limitations

    BIOS ONSOLE EDIRECTION Limitations Keystroke Mappings (Continued) ANSI E SCAPE INDOWS LATFORM ESIGN BIOS Console redirection terminates after an operating EQUENCE  system has being loaded. The operating system is <ESC><Shift>or <ESC>3 responsible for continuing console redirection after that. <ESC><Shift>os <ESC>4 BIOS console redirection is a text console.

  • Page 143: Pxe Boot

    BIOS PXE B PXE Boot Checkpoint Ranges Checkpoint Ranges The BIOS supports the EFI PXE implementation. To utilize this, TATUS the user must load EFI Simple Network Protocol driver and the ESCRIPTION ANGE UNDI driver specific for the network interface card being used. 0x01 –...

  • Page 144: Standard Checkpoints

    BIOS HECKPOINTS Standard Checkpoints SEC Phase (Continued) TATUS ESCRIPTION SEC Phase 0x0F Microcode not loaded SEC Phase PEI Phase TATUS ESCRIPTION PEI Phase 0x00 Not used Progress Codes TATUS ESCRIPTION 0x01 Power on. Reset type detection (soft/hard). Progress Codes 0x02 AP initialization before microcode loading 0x10 PEI Core is started...
  • Page 145 BIOS HECKPOINTS PEI Phase (Continued) PEI Phase (Continued) TATUS ESCRIPTION TATUS ESCRIPTION Pre-memory South Bridge initialization (South Bridge 0x37 Post-Memory North Bridge initialization is started 0x1B module specific) Post-Memory North Bridge initialization (North Bridge 0x38 Pre-memory South Bridge initialization (South Bridge module specific) 0x1C module specific)
  • Page 146 BIOS HECKPOINTS PEI Phase (Continued) PEI Phase (Continued) TATUS ESCRIPTION TATUS ESCRIPTION 0x54 Unspecified memory initialization error. 0xEB S3 OS Wake Error 0x55 Memory not installed 0xEC – 0xEF Reserved for future AMI error codes 0x56 Invalid CPU type or Speed Recovery Progress Codes 0x57 CPU mismatch...

  • Page 147: Dxe Phase

    BIOS HECKPOINTS DXE Phase DXE Phase (Continued) TATUS ESCRIPTION DXE Phase 0x72 South Bridge devices initialization TATUS ESCRIPTION 0x73 South Bridge DXE Initialization (South Bridge module specific) 0x60 DXE Core is started 0x74 South Bridge DXE Initialization (South Bridge module specific) 0x61 NVRAM initialization 0x75...
  • Page 148 BIOS HECKPOINTS DXE Phase (Continued) DXE Phase (Continued) TATUS TATUS ESCRIPTION ESCRIPTION 0x98 Console input devices connect 0xAC Reserved for ASL (see ASL Status Codes section below) 0x99 Super IO Initialization 0xAD Ready To Boot event 0x9A USB initialization is started 0xAE Legacy Boot event 0x9B...

  • Page 149: Acpi/Asl Checkpoints

    BIOS XTRA HECKPOINT ANGES DXE Phase (Continued) ACPI/ASL Checkpoints (Continued) TATUS TATUS ESCRIPTION ESCRIPTION 0xD3 Some of the Architectural Protocols are not available 0x20 System is waking up from the S2 sleep state 0xD4 PCI resource allocation error. Out of Resources 0x30 System is waking up from the S3 sleep state 0xD5...
  • Page 150 Chapter 4...

  • Page 151: Server Management Software

    ERVER ANAGEMENT OFTWARE 4.1. Server Management Software Introduction Platform Event Filtering (PEF) to take selected actions for  selected events, including NMI. Chassis management includes power control and a status  report, front panel buttons and LED control. This section introduces the Baseboard Management Controller Watchdog and auto server restart and recovery.

  • Page 152: Power Button

    RONT ANEL NTERFACE Power Button Status LED Activity (Continued) TATUS ESCRIPTION As previous described, the Power buttons provide one of the CTIVITY sources for system status control. Voltage Sen- Critical event asserted sors ID Button Power Supply State asserted Processor Thermal trip The control panel Chassis Identify button toggles the state of SEL almost full...

  • Page 153: Lan Interface

    LAN I NTERFACE LAN Interface Session and User This BMC supports ten (10) user accounts. Each can have a BMC LAN interface in AST2300 is assigned to dedicated NIC different user name, password and privilege level. Four LAN (Default) and a shared NIC in S200-X12TS. IPMI Specifi- accounts can login simultaneously.

  • Page 154: Time Sync

    Time Sync The number of Alert Policy Table is 120 and Alert Destina-  tion Table is 30. Dedicated and Shared NIC)  In S2TS/TQ BMC design, BMC does not have a local RTC to The policy to match an event to Platform Event Filter Table know what time it is.

  • Page 155: Bmc Firmware Update

    BMC F IRMWARE PDATE BMC Firmware Update The BMC will allow users to upgrade firmware image on follow- ing entities:  All other upgradable entities  The update capability is provided by local and remote inter- faces. DOS Recovery Utility SOCFLASH Utility.

  • Page 156: Bmc Recovery

    BMC R ECOVERY 4.2. BMC Recovery This section provides guidelines on BMC recovery process in The BMC recovery is complete. DOS, Linux, and Windows systems. Recovery Process in Windows Recovery Process in DOS System System To recover BMC on a DOS system, do as follows: To recover BMC on a Windows system, do as follows: 1.

  • Page 157: Web Graphical User Interface (Gui) For Esms

    (GUI) ESMS RAPHICAL NTERFACE 4.3. Web Graphical User Interface (GUI) for ESMS Using the Web GUI Login The BMC firmware features an embedded web server enabling Enter the IP address or URL (default DHCP\static IP address) users to connect to the BMC using a Web browser (e.g. Micro- into the address bar of the web browser.
  • Page 158 OGIN No Access privilege levels do not allow access through the Click the Help button on the right corner of the page for assis- BMC web GUI. tance, the Refresh button to refresh the page, or the Logout button to exit. Main Web Page Login Web Page Main Web Page...

  • Page 159: Dashboard

    ASHBOARD Dashboard Device Information The Device Information displays the following information: In MegaRAC GUI, the Dashboard page displays the overall information on status of the device. Device Information Page To open the Dashboard page, click Dashboard from the main menu. A sample screenshot of the Dashboard page is as fol- ESCRIPTION lows: Firmware Revision...

  • Page 160: Network Information

    ASHBOARD Network Information Sensor Monitoring The Network Information of the device with the following fields Lists all the available sensors on the device. is shown in the following table. To edit the network Information, click Edit. The status column displays the state of the device as follows: Network Information TATUS ICON...

  • Page 161: Event Logs

    ERVER NFORMATION Server Information Event Logs A graphical representation of all events incurred by various sen- The Server Information Group consists of the following three sors as well as occupied/available space in logs. Clicking on the items: color-coded rectangle in the Legend for the chart, allows to view a list of specific events only.

  • Page 162: Fru Information

    FRU I NFORMATION FRU Information A brief description of the fields is given in the following sections. Basic Information In the MegaRAC GUI, the FRU Information Page displays the BMC FRU file information. The information displayed in this page is Basic Information, Common Header Information, Chas- Basic Information sis Information, Board Information and Product Information of the FRU device.

  • Page 163: Server Component

    FRU I NFORMATION Server Component Board Product Name  Board Serial Number  The Component Information page displays the CPU and mem- Board Part Number  ory information. FRU File ID  Board Extra  Product Information Product Information Area Format Version ...

  • Page 164: Server Identify

    FRU I NFORMATION Server identify Component Information Page (Continued) ESCRIPTION The Server Identify page displays the indicator LED status. You Displays the following information: can select a Server Identify Operation to control the indicator Memory ID,  LED. Status,  Socket, ...

  • Page 165: Server Health Group

    FRU I NFORMATION Server Health Group Server Identify Page (Continued) ESCRIPTION The Server Health Group consists of the following three items: Server identify LED operation with the following options: Sensor Readings  Server Identify Oper-  ation Event Log  ...
  • Page 166 FRU I NFORMATION screenshot of Sensor Readings page is shown in the following When a specific type of sensor is selected, on the right hand image: side of the screen will be displayed the Thresholds for the sen- sor. The total of six thresholds are available as follows: Lower Non-Recoverable (LNR) ...

  • Page 167: Event Log

    FRU I NFORMATION Event Log ings for the sensor. The following image shows and example widget: In MegaRAC GUI, this page displays the list of event logs occurred by the different sensors on this device. Double click on a record to see the details of that entry. You can use the sensor type or sensor name filter options to view those specific events or you can also sort the list of entries by clicking on any of the column headers.

  • Page 168: Configuration Group

    ONFIGURATION ROUP Configuration Group Event Log Category ESCRIPTION Configuration Group page allows access to various configura- The type of filter listed. tion settings. A screenshot of the Configuration Group menu is Note: shown in the following figure: Once the Event Log category and Filter type are Filter Type selected, the list of events will be displayed with the Event ID, Time Stamp, Sensor Type, Sensor...
  • Page 169 ONFIGURATION ROUP This Active Directory Settings page in MegaRAC SP-X as Active Directory Settings Page (Continued) shown on the following figure, allows to Configure Active Direc- tory Server Settings. ESCRIPTION The name that identifies the role group in the To open Active Directory Settings page, click Configuration > Active Directory.
  • Page 170 ONFIGURATION ROUP 6. Configure IP addresses in Domain Controller Server Procedure: Address1, Domain Controller Server Address2 & Entering the details in Advanced Active Directory Settings Page Domain Controller Server Address3. 1. Click on Advanced Settings to open the Advanced Note: Active Directory Settings Page.

  • Page 171: Dns

    ONFIGURATION ROUP 9. In the Active Directory Settings Page, select a blank row 13.Click Add to save the new role group and return to the and click Add Role Group to open the Add Role group Role Group List. Page as shown in the screenshot below. 14.Click Cancel to cancel the settings and return to the Role Group List.
  • Page 172 ONFIGURATION ROUP To open DNS Server Settings page, click Configuration > DNS DNS Server Settings Page (Continued) from the main menu. A sample screenshot of DNS Server Set- tings Page is shown in the screenshot below. ESCRIPTION Register BMC Register BMC To enable/disable Register BMC.

  • Page 173: Ldap/E-Directory

    ONFIGURATION ROUP Check the option Register BMC to register with this DNS Server Settings Page (Continued)  DNS settings. ESCRIPTION 4. In the Domain name Configuration Settings, Specify the DNS (Domain Name System) server Select the domain settings from the dropdown list. address to be configured for the BMC.
  • Page 174 ONFIGURATION ROUP ® way to add, manage and authenticate MegaRAC card users. LDAP Settings Page This is done by passing login requests to your LDAP Server. This means that there is no need to define an additional authen- ESCRIPTION tication mechanism, when using the MegaRAC card. Since To configure LDAP Advanced Settings.
  • Page 175 ONFIGURATION ROUP Note: Note: At login prompt, enter username to login as an LDAP group Searchbase is a string of 4 to 63 alpha-numeric characters.  member. It must start with an alphabetical character.  Special Symbols like dot(.), comma(,), hyphen(-), under- ...
  • Page 176 ONFIGURATION ROUP 16.In the LDAP Settings Page, select the row that you wish to delete and click Delete Role Group. Note: Role Group Name is a string of 255 alpha-numeric charac-  ters. Special symbols hyphen and underscore are allowed. ...

  • Page 177: Mouse Mode

    ONFIGURATION ROUP Mouse Mode Mouse Mode Settings Page (Continued) ESCRIPTION In MegaRAC GUI, Redirection Console handles mouse emula- Relative mode sends the calculated relative tion from local window to remote screen in either of two meth- Relative Mode mouse position displacement to the server. ods.

  • Page 178: Network

    ONFIGURATION ROUP Network Network Settings Page ESCRIPTION In MegaRAC GUI, the Network Settings Page is used to config- LAN Interface Lists the LAN interfaces. ure the network settings for the available LAN channels. LAN Settings To enable or disable the LAN Settings. To open Network Settings page, click Configuration >...
  • Page 179 ONFIGURATION ROUP Network Settings Page (Continued) Network Settings Page (Continued) ESCRIPTION ESCRIPTION This option lists the following IPv6 configuration It lists the VLAN configuration settings. settings. VLAN Settings: To enable/disable the VLAN  IPv6 Settings: This option is to enable the support for selected interface.

  • Page 180: Pef

    ONFIGURATION ROUP 6. If the IPv6 setting is enabled, enable or disable the option agement Settings Page is shown in the screen shot below along with an explanation of each of the tabs. Use DHCP for obtaining the IP address automatically. 7.
  • Page 181 ONFIGURATION ROUP This page contains the list of configured PEF’s. screenshot of Add Event Filter Page is in seen the screenshot below. PET Management - Event Filter ESCRIPTION This field displays the ID for the newly config- PEF ID ured PEF entry (read-only). Filter configuration Check box to enable the PEF settings.
  • Page 182 ONFIGURATION ROUP Event Filter Action is a mandatory field and checked by In the Slave Address/Software ID field, specify corre-   default, which enable PEF Alert action (read-only). sponding I2C Slave Address or System Software ID. Select any one of the Power action either Power down, Choose the particular channel number that event mes- ...
  • Page 183 ONFIGURATION ROUP 12.Click on Cancel to cancel the modification and return to Note: Event filter list. Value ranges from 0 to 255. 13.In the Event filter list, click Modify to modify the existing filter. 14.In the Event filter list, click Delete to delete the existing fil- Event Data 1 Compare 1 &...
  • Page 184 ONFIGURATION ROUP PEF Management - Alert Policy (Continued) PEF Management - Alert Policy ESCRIPTION ESCRIPTION To choose a particular destination from the con- Displays Policy entry number for the newly con- Policy Entry # figured destination list. figured entry (read-only). Note: Policy Number Displays the Policy number of the configuration.
  • Page 185 ONFIGURATION ROUP 2. Select the slot and click Add to open the Add Alert Pol- 9. In the Alert String field, enable the check box if the Alert icy Entry Page as shown in the screenshot below. policy entry is Event Specific. 10.In the Alert String Key field, choose any one value that is used to look up the Alert String to send for this Alert Pol- icy entry.
  • Page 186 ONFIGURATION ROUP PEF Management LAN Destination Page PEF Management - LAN Destination (Continued) ESCRIPTION This page is used to configure the Event filter, Alert Policy and LAN destination. A sample screenshot of PEF Management Destination type can be either an SNMP Trap or an Email alert.

  • Page 187: Radius

    ONFIGURATION ROUP 1. In the LAN Destination Tab, choose the slot to be config- 7. In the Subject field, enter the subject. ured. This should be the same slot that you have selected 8. In the Message field, enter the message. in the Alert Policy Entry- Destination Selector field.
  • Page 188 ONFIGURATION ROUP To open RADIUS Settings page, click Configuration > RADIUS RADIUS Settings Page (Continued) from the main menu. A sample screenshot of RADIUS Settings Page is shown in the screenshot below. ESCRIPTION The Time out value in seconds. Note: Time Out Default Timeout value is 3seconds.

  • Page 189: Remote Session

    ONFIGURATION ROUP 2. Enter the port number in the Port Number field. The fields of Remote Session Settings Page are explained below. 3. Enter the time out value in seconds in the Time out field. 4. Enter the address of the server in the Server Address Remote Session Settings Page field.

  • Page 190: Smtp

    ONFIGURATION ROUP 3. In Virtual media Attach mode, select Auto Attach or To open SMTP Settings page, click Configuration > SMTP Attach from the dropdown list as required. from the main menu. A sample screenshot of SMTP Settings Page is shown in the screenshot below. 4.
  • Page 191 ONFIGURATION ROUP SMTP Settings Page (Continued) SMTP Settings Page (Continued) ESCRIPTION ESCRIPTION Primary SMTP Server Lists the Primary SMTP Server configuration. The username to access SMTP Accounts. The 'IP address' of the SMTP Server. It is a man- Note: datory field. User Name can be of length 4 to 64 alpha- ...

  • Page 192: Sol

    ONFIGURATION ROUP 2. Enter the Sender Address in the specified field. 3. Enter the Machine Name in the specified field. Here, you can configure the Serial over LAN settings, select or 4. In Primary SMTP Server, enter the Server Address in change values for each attribute and click the Save button to the specified field.

  • Page 193: Ssl

    ONFIGURATION ROUP SOL Settings Page SOL Advanced Settings ESCRIPTION ESCRIPTION Enable Serial over The amount of the time that the BMC will wait Checked=Enabled; Unchecked=Disabled. Character Accumu- before transmitting a partial SOL character data late Interval package. 1-based 5ms increments. This value Select the IPMI Serial over LAN minimum user must be less than 255.
  • Page 194 ONFIGURATION ROUP Upload SSL option is used to upload the certificate and SSL Certificate Configuration - Upload SSL (Continued)  private key file into the BMC. ESCRIPTION Generate SSL option is used to generate the SSL certifi-  New Certificate Certificate file should be of pem type cate based on configuration details.
  • Page 195 ONFIGURATION ROUP The fields of SSL Certificate Configuration – Generate SSL tab SSL Certificate Configuration - Generate SSL (Continued) are explained below. ESCRIPTION Country code of the organization (mandatory). SSL Certificate Configuration - Generate SSL Country (C) Only two characters are allowed. ...
  • Page 196 ONFIGURATION ROUP SSL Certificate Configuration – View SSL Note: HTTPs service will get restarted, to use the newly generated ESCRIPTION SSL certificate. This section displays the basic information about the uploaded SSL certificate. It displays the fol- lowing fields. Version ...
  • Page 197 ONFIGURATION ROUP The City or Locality of the organization SSL Certificate Configuration – View SSL (Continued)  The State or Province of the organization  ESCRIPTION The Country of the organization  This section display the information about the certificate issuer. The email address of the organization.

  • Page 198: User Management

    ONFIGURATION ROUP User Management User Management Page (Continued) ESCRIPTION In MegaRAC GUI, the User Management page allows you to User Name Displays the name of the user. view the current list of user slots for the server. You can add a new user and modify or delete the existing users.
  • Page 199 ONFIGURATION ROUP 1. To add a new user, select a free slot and click Add User. This opens the Add User screen as shown in the screen- Note: shot below. White space is not allowed.  This field will not allow more than 20 characters. ...
  • Page 200 ONFIGURATION ROUP 10.In the Email ID field, enter the email ID of the user. If the 14.Select an existing user from the list and click Modify user forgets the password, the new password will be User. This opens the Add User screen as shown in the mailed to the configured email address.

  • Page 201: Virtual Media

    ONFIGURATION ROUP Configure Virtual Media Devices Note: There is a list of reserved users which cannot be added / modi- ESCRIPTION fied as BMC users. Please Refer “MEGARAC SP-X Platform Porting Guide” section “Changing the Configurations in PMC The number of floppy devices that support for Floppy devices File->...

  • Page 202: Remote Control

    EMOTE ONTROL Console Redirection Note: If there are two device panels for each device, and when you click the Connect button, then the redirected device panel will The remote console application, which is started using the be disabled. WebGUI, allows you to control your server's operating system remotely, using the screen, mouse, and keyboard, and to redi- Remote Control rect local CD/DVD, Floppy diskette and Hard disk/USB thumb...

  • Page 203: Browser Settings

    EMOTE ONTROL OpenSuse 11.2 -32 OpenSuse 11.2   OpenSuse 11.2 -64 OpenSuse 10.x   FC 9 - 32 Ubuntu 8.10   FC 9 - 64 Ubuntu 9.10   FC 10 - 32 Ubuntu 11.04   FC 10 - 64 ...
  • Page 204 EMOTE ONTROL Video 2. Open Remote Control > Console Redirection Page and click Java Console. This menu contains the following sub menu items. This will download the .jnlp file from the BMC. Video To open the .jnlp file, use the appropriate JRE version (Javaws) ESCRIPTION The Console Redirection window opens when the downloading is done.
  • Page 205 EMOTE ONTROL Keyboard ESCRIPTION This menu item can be used to act as the right- Hold Right Ctrl Key side <CTRL> key when in Console Redirection. This menu item can be used to act as the right- Hold Right Alt Key side <ALT>...

  • Page 206: Keyboard Layout

    EMOTE ONTROL Keyboard Layout Virtual Media (Continued) ESCRIPTION Keyboard Layout This menu item can be used to start or stop the CD/DVD Media redirection of a physical DVD/CD-ROM drive ESCRIPTION and cd image types such as iso. This option is used to detect keyboard layout This menu item can be used to start or stop the automatically.
  • Page 207 EMOTE ONTROL 1. Click Video Record > Settings to open the settings page Video Record as shown in the screenshot below. ESCRIPTION To view this menu option you must download the Java Media FrameWork (JMF). It can be down- loaded from the link Important http://www.oracle.com/technetwork/java/javase/ download-142937.html...

  • Page 208: Server Power Control

    EMOTE ONTROL Active Users screenshot of Power Control and Status page is shown in the screenshot below. Click this option to displays the active users and their system IP address. Help Jviewer: Displays the copyright and version information Quick Buttons The lower right of Console Redirection windows displays all the Power Control and Status Page quick buttons.

  • Page 209: Maintenance Group

    AINTENANCE ROUP System Administrator Server Power Control (Continued)  ESCRIPTION Click this option to perform the selected opera- Perform Action tion. Procedure: Maintenance Menu Select an action and click Perform Action to proceed with the A detailed description is given ahead. selected action.
  • Page 210 AINTENANCE ROUP 1. Closing all active client requests. Note: 2. Preparing device for firmware upgrade. The firmware upgrade process is a crucial operation. Make sure that the chances of a power or connectivity loss are minimal 3. Uploading firmware image. when performing this operation.

  • Page 211: Bios Update

    AINTENANCE ROUP BIOS Update preserve the existing configuration without overwriting with default configuration. This page allow user to update BIOS image, but only works when DC is off. Please note the filename extension of BIOS image shall be bin. For example: BIOS3A22.bin. After BIOS update complete, system must perform AC cycle to take effect.

  • Page 212: System Administrator

    AINTENANCE ROUP screenshot of Restore Factory Defaults Page is shown in the of System Administrator page is shown in the screenshot screenshot below. below. System Administrator Restore Factory Defaults Page The various fields of System Administrator page are given Procedure: below.

  • Page 213: Log Out

    Log Out System Administrator Page (Continued) ESCRIPTION To log out of the MegaRAC GUI, click the logout link on the top To change the user's password. right corner of the screen. Note: Password, Confirm Password:  User Privilege Password must be at least 8 characters Change Password ...
  • Page 214 RIVILEGE User Privilege (Continued) IPMI RIVILEGE ASSOCIATION BETWEEN GUI P RIVILEGE DMINIST PERATO RATOR View DNS View Network View PEF 4-64...

  • Page 215: Connectors And Jumpers

    Connectors and Jumpers Chapter 5...

  • Page 216: Mainboard Jumpers And Connectors

    ONNECTORS AND UMPERS AINBOARD UMPERS AND ONNECTORS 5.1. Mainboard Jumpers and Connectors Connectors and Jumpers Mainboard Connectors OCATION ONNECTOR This section provides information on basic connectors and CPU1 socket jumpers on system mainboard. SATA/SAS Connector (x8) Mezzanine card Gen2 x8 Riser Slot Power Button with LED USB Port (x2) VGA Port...
  • Page 217 ONNECTORS AND UMPERS ONNECTORS AND UMPERS Mainboard Jumpers (Continued) Mainboard Jumpers UMPER EFAULT UMPER EFAULT OCATION UNCTION OCATION UNCTION OSITIONS ETTING OSITIONS ETTING BIOS RECOVERY JUMPER CMOS CLEAR Normal (sys- Normal RTC tem) Reset BIOS to CLR RTC Reg- Deafult Settings isters POWER BUTTON SKIPPING BMC JUMPER PASSWORD CLEAR...

  • Page 218: Rail Kit Assembly

    Rail Kit Assembly Chapter 6...

  • Page 219: Installing The Rack Brackets

    SSEMBLY SSEMBLY 6.1. Rail Kit Assembly Installing the Rack Brackets Preparing for the Installation Review all the tasks required to install and configure the  When the server is to be installed into a rack, it is necessary to system install two rack mount brackets onto the server chassis prior to installing the server into the rack.

  • Page 220: Installing The Inner Rail

    SSEMBLY NSTALLING THE RACKETS Installing the Inner Rail 3. Slide the inner rail until the latch key on the rail locks and is secure to the chassis. Follow these instructions to install inner rail: 1. Slide the release tab to the open position and remove the inner rail from the rail kit assembly.

  • Page 221: Installing The Outer Rail

    SSEMBLY NSTALLING THE YSTEM NTO THE Installing the System Into the Installing the Outer Rail Rack 1. Align the screws on the outer rail with the screw holes on the front cabinet column. WARNING! 2. Guide the screws on outer rail through the screw holes on Prior installing the system into the slide rail, make sure the the front cabinet column until the rail clicks in place.

  • Page 222: Troubleshooting

    Troubleshooting Chapter 7...

  • Page 223: Server Boot Issue Topics

    ROUBLESHOOTING ROUBLESHOOTING 7.1. Troubleshooting Server Boot Issue Topics System does not Boot after Initial Installation System does not Boot after initial installation: Power Cord Not Plugged In Power Cord Not Plugged In  If the power supply cable is not plugged into the chassis power Processor Issues ...

  • Page 224: Memory Issues

    ROUBLESHOOTING ERVER SSUE OPICS Power Supply, Chassis and Fan Issues Ensure that the power supply fan is running.  Ensure that the air intakes for the fans are unobstructed.  Ensure that the chassis and power supply is appropriate  for system requirement.

  • Page 225: System Does Not Boot After Configuration Changes

    ROUBLESHOOTING ERVER SSUE OPICS System does not boot after Configu- Electrical Short or Overload ration Changes Remove non-essential items such as extra controller cards (e.g SAS 6G Mezz/B, 10GbE Mezz/B) or HDD devices to check for Hardware Changes shorts and overloads. If the system boots correctly, there may be a short or overload If the system does not boot after making changes to hardware associated with one of the components.

  • Page 226: Installation Problems

    ROUBLESHOOTING ERVER SSUE OPICS Installation Problems If you cannot access the BIOS Setup Utility, clear the CMOS by performing the following steps: Perform the following checks if you are troubleshooting an 1. Power down the server. Do not unplug the power cord. installation problem: 2.

  • Page 227: Power Throttling Function

    ROUBLESHOOTING OWER HROTTLING UNCTION Power Throttling Function Note: Power throttling function is supported only in redundant PSU systems. The function cannot be activated if only one PSU is installed. If a PSU in a redundant PSU system fails (i.e power cable is not plugged in properly), to reduce fan speed, power throttling function starts to lower temporarily CPU and DIMM throughput.

  • Page 228: Installation And Assembly Safety Instructions

    Installation and Assembly Safety Instructions Chapter 8...

  • Page 229: Installation Assembly Safety Instructions

    NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS NSTALLATION SSEMBLY AFETY NSTRUCTIONS 8.1. Installation Assembly Safety Instructions Guidelines The power supply in this product contains no user-serviceable parts. Refer servicing only to qualified personnel. Do not attempt to modify or use the supplied AC power cord if it is not the exact type required. A product with more than one power supply will have a separate AC power cord for each supply.
  • Page 230 NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS UIDELINES SAFETY STEPS: Whenever you remove the chassis covers to access the inside of the system, follow these steps: 1. Turn off all peripheral devices connected to the system. 2. Turn off the system by pressing the power button. 3.
  • Page 231 NSTALLATION AND SSEMBLY AFETY NSTRUCTIONS UIDELINES The system is designed to operate in a typical office environment. Choose a site that is: Clean and free of airborne particles (other than normal room dust).  Well ventilated and away from sources of heat including direct sunlight. ...
  • Page 232 Safety Information Chapter 9...

  • Page 233: Server Safety Information

    AFETY NFORMATION ERVER AFETY NFORMATION 9.1. Server Safety Information Safety Warnings and Cautions To reduce the risk of bodily injury, electrical shock, fire, and equipment damage, read this document and observe all warn- ings and precautions in this guide before installing or maintain- ing your server product.

  • Page 234: Intended Application Uses

    AFETY NFORMATION NTENDED PPLICATION Intended Application Uses Indicates do not touch fan blades, may result in injury. This product was evaluated as Information Technology Equip- ment (ITE), which may be installed in offices, schools, computer Indicates to unplug all AC power cord(s) to discon- rooms, and similar commercial type locations.

  • Page 235: Site Selection

    AFETY NFORMATION ELECTION Site Selection Equipment Handling Practices The system is designed to operate in a typical office environ- Reduce the risk of personal injury or equipment damage: ment. Choose a site that is: Conform to local occupational health and safety require- ...

  • Page 236: Power And Electrical Warnings

    AFETY NFORMATION OWER AND LECTRICAL ARNINGS Power and Electrical Warnings CAUTION! HEN REPLACING A HOT PLUG POWER SUPPLY UNPLUG THE POWER CORD TO THE POWER SUPPLY BEING REPLACED BEFORE REMOVING IT FROM THE SERVER CAUTION! HE POWER BUTTON INDICATED BY THE STAND BY POWER MARK , DOES NOT COMPLETELY TURN OFF THE SYSTEM...

  • Page 237: System Access Warnings

    AFETY NFORMATION YSTEM CCESS ARNINGS System Access Warnings CAUTION! HE POWER SUPPLY CORD MUST BE PLUGGED INTO SOCKET OUTLET THAT IS ARE PROVIDED WITH A SUITABLE EARTH GROUND CAUTION! O AVOID PERSONAL INJURY OR PROPERTY DAMAGE THE FOLLOW ING SAFETY INSTRUCTIONS APPLY WHENEVER ACCESSING THE INSIDE OF THE PRODUCT Turn off all peripheral devices connected to this product.

  • Page 238: Rack Mount Warnings

    AFETY NFORMATION OUNT ARNINGS You are responsible for installing a main power disconnect for CAUTION! the entire rack unit. This main disconnect must be readily NLESS YOU ARE ADDING OR REMOVING A HOT PLUG COMPONENT accessible, and it must be labeled as controlling power to the ALLOW THE SYSTEM TO COOL BEFORE OPENING THE COVERS entire unit, not just to the server(s).

  • Page 239: Electrostatic Discharge (Esd)

    (ESD) AFETY NFORMATION LECTROSTATIC ISCHARGE Other Hazards Reliable Earthing - Reliable earthing of rack-mounted equip- ment should be maintained. Particular attention should be given to supply connections other Battery Replacement than direct connections to the branch circuit (e.g. use of power strips).

  • Page 240: Cooling And Airflow

    AFETY NFORMATION THER AZARDS Cooling and Airflow CAUTION! AREFULLY ROUTE CABLES AS DIRECTED TO MINIMIZE AIRFLOW BLOCKAGE AND COOLING PROBLEMS OR PROPER COOLING AND AIRFLOW OPERATE THE SYSTEM ONLY WITH THE CHASSIS COVERS INSTALLED PERATING THE SYSTEM WITHOUT THE COVERS IN PLACE CAN DAMAGE SYSTEM PARTS O INSTALL THE COVERS Check first to make sure you have not left loose tools or...
  • Page 241 Regulatory and Compliance Infor- mation Chapter 10...

  • Page 242: Product Regulatory Compliance Markings

    EGULATORY AND OMPLIANCE NFORMATION RODUCT EGULATORY OMPLIANCE ARKINGS 10.1. Product Regulatory Compliance Markings Product Regulatory Compliance Markings (Continued) This product is marked with the following product certification markings: BSMI Certifi- Product Regulatory Compliance Markings cation Num- R43039 Taiwan ber & Class A EGULATORY Warning EGION...

  • Page 243: Electromagnetic Compatibility Notices

    EGULATORY AND OMPLIANCE NFORMATION LECTROMAGNETIC OMPATIBILITY OTICES 10.2. Electromagnetic Compatibility Notices FCC Verification Statement Connect the equipment to an outlet on a circuit other than  the one to which the receiver is connected. (USA) Consult the dealer or an experienced radio/TV technician ...

  • Page 244: Europe (Ce Declaration Of Conformity)

    (CE D EGULATORY AND OMPLIANCE NFORMATION UROPE ECLARATION OF ONFORMITY Europe (CE Declaration of Con- BSMI (Taiwan) formity) The BSMI Certification Marking and EMC warning is located on the outside rear area of the product This product has been tested in accordance too, and complies with the Low Voltage Directive (73/23/EEC) and EMC Directive (89/336/EEC).

  • Page 245: Restriction Of Hazardous Substances (Rohs) Compliance

    / or stances (RoHS) Compliance take-back. ® Quanta Computer Inc. has a system in place to restrict the use of banned substances in accordance with the European Direc- tive 2002/95/EC. Compliance is based on declaration that...

Table of Contents