Updating The Bmc Firmware; Bmc Firmware Update Utility; Bmc Firmware Update Procedure; Appendix B - QUANTA QSSC-980 User Manual

BMC Firmware Update Utility

The BMC (Baseboard Management Controller) firmware update utility is a DOS-based program used to update
the BMC firmware code. This utility should only be run if new firmware code is necessary.

BMC Firmware Update Procedure

There are two means to update BMC Firmware. The user can update BMC Firmware from WebUI or DOS. Be-
fore proceeding, read the BMC firmware release notes to determine which update utility version is appropriate for
the new firmware version.
Note:
Turn the AC power off and on after updating the BMC Firmware.
Using WebUI to update BMC Firmware
1. Login into BMC web via web browser, go to Maintenance
grade Mode.
2. Select the file "S98vxxx.bin" to update.
3. The server reboots after the upgrade is complete.
Using DOS to update BMC Firmware
1. Copy the BMC firmware update utility bmcfu.exe and BMC firmware image file S98vxxx.bin to an
easily accessible location such as remote HDD or USB key. Then Boot QSSC-98MB into DOS mode.
Note:
Do not use memory management utilities in the DOS environment during the firm-
ware update procedure. Management utilities may cause the firmware update
procedure to fail.
2. In Upgrade Mode, use the following command to upgrade the firmware.
bmcfu.exe S98vxxx.bin
3. Press the Enter key.
4. Download displays a message during the flash in progress. The server reboots after the upgrade is com-
plete.
5. When the server restarts, in the Web Server, go to System Information Version BMC Version and
check the firmware version matches the update file version.
錯誤 尚未定義樣式。
!
U p d a t i n
U p d a t i n
Firmware Upgrade and click Enter Up-
113

— Updating the BMC Firmware

Appendix B

g t h e B M C F i r m
g t h e B M C F i r
w a r e
m w a r e