Ldap/E-Directory - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC

[3.1.149] LDAP/E-Directory

[3.1.150] The Lightweight Directory Access Protocol
(LDAP) is an application protocol for querying and modifying
data of directory services implemented in Internet Protocol (IP)
networks.
[3.1.151] In MegaRAC GUI, LDAP is an Internet protocol that
®
MegaRAC card can use to authenticate users. If you have an
LDAP server configured on your network, you can use it as an
easy way to add, manage and authenticate MegaRAC
users. This is done by passing login requests to your LDAP
Server. This means that there is no need to define an additional
authentication mechanism, when using the MegaRAC card.
Since your existing LDAP Server keeps an authentication cen-
tralized, you will always know who is accessing the network
resources and can easily define the user or group-based poli-
cies to control access.
[3.1.152] To open LDAP Settings page, click Configuration >
LDAP from the main menu. A sample screenshot of LDAP Set-
tings Page is shown in the screenshot below.
®
card
[3.1.154] The fields of LDAP Settings Page are explained
below.
[3.1.155] LDAP Settings Page
I
TEM
Advanced Settings
Add Role Group
Modify Role Group
Delete Role Group
[3.1.156] Procedure:
3-18
C
[3.1.153] LDAP Settings Page
D
ESCRIPTION
To configure LDAP Advanced Settings. Options
are Enable LDAP Authentication, IP Address,
Port and Search base.
To add a new role group to the device. Alterna-
tively, double click on a free slot to add a role
group.
To modify the particular role group.
To be delete a role group from the list.
G
ONFIGURATION ROUP