Server Safety Information - QUANTA W Mainboard Series S210-MBT2W Technical Manual

S I
AFETY NFORMATION

[7.1.1] Server Safety Information

[7.1.2] To reduce the risk of bodily injury, electrical shock, fire,
and equipment damage, read this document and observe all
warnings and precautions in this guide before installing or main-
taining your server product.
[7.1.3] In the event of a conflict between the information in this
document and information provided with the product or on the
website for a particular product, the product documentation
takes precedence.
[7.1.4] Your server should be integrated and serviced only by
technically qualified persons.
[7.1.5] You must adhere to the guidelines in this guide and the
assembly instructions in your server manuals to ensure and
maintain compliance with existing product certifications and
approvals. Use only the described, regulated components
specified in this guide. Use of other products / components will
void the UL Listing and other regulatory approvals of the prod-
uct, and may result in noncompliance with product regulations
in the region(s) in which the product is sold.
[7.1.6] Safety Warnings and
Cautions
[7.1.7] To avoid personal injury or property damage, before you
begin installing the product, read, observe, and adhere to all of
the following safety instructions and information. The following
safety symbols may be used throughout the documentation and
may be marked on the product and / or the product packaging.
[7.1.9] Indicates the presence of a hazard that may
[7.1.8] CAUTION cause minor personal injury or property damage if
the CAUTION is ignored.
[7.1.11] Indicates the presence of a hazard that
[7.1.10] WARNIN
may result in serious personal injury if the WARN-
G
ING is ignored.
[7.1.13] Indicates potential hazard if indicated infor-
mation is ignored.
[7.1.12]
[7.1.15] Indicates shock hazards that result in seri-
[7.1.14]
ous injury or death if safety instructions are not fol-
lowed.
7-1
S S I
ERVER AFETY NFORMATION