QUANTA W Mainboard Series S210-MBT2W Technical Manual page 224

BMC
[3.1.337] SOL
[3.1.338] Here, you can configure the Serial over LAN settings,
select or change values for each attribute and click the Save
button to save any changes.
[3.1.339] SOL Settings Page
[3.1.340] The fields of SOL Settings Page are explained below.
[3.1.341] SOL Settings Page
I
TEM
Enable Serial over
Checked=Enabled; Unchecked=Disabled.
LAN
D
ESCRIPTION
3-37
[3.1.341] SOL Settings Page (Continued)
I
TEM
Select the IPMI Serial over LAN minimum user
privilege:
Channel Privilege
Administrator

Level Limit
Operator

User

Save Use this button to save your settings.
Advanced SOL Set-
Use this button to go to advanced SOL page.
tings
[3.1.342] SSL
[3.1.343] The Secure Socket Layer protocol was created by
Netscape to ensure secure transactions between web servers
and browsers. The protocol uses a third party, a Certificate
Authority (CA), to identify one end or both end of the transac-
tions.
[3.1.344] Using MegaRAC GUI, configure SSL certificate into
the BMC. Using this, the device can be accessed in a secured
mode.
[3.1.345] To open SSL Certificate Configuration page, click
Configuration > SSL from the main menu. There are three
tabs on this page.
C G
ONFIGURATION ROUP
D
ESCRIPTION