Remote Session - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC
[3.1.294] RADIUS Settings Page (Continued)
I
TEM
Reset To reset the modified changes.
[3.1.296] Procedure:
3.1.297.1.Enable the RADIUS Authentication checkbox to
authenticate the RADIUS.
3.1.298.2.Enter the port number in the Port Number field.
3.1.299.3.Enter the time out value in seconds in the Time
out field.
3.1.300.4.Enter the address of the server in the Server
Address field.
3.1.301.5.Enter the authentication secret for RADIUS Server
in the Secret field.
3.1.302.6.Click Save to save the entered details.
3.1.303.7.Click Reset to reset the entered details.

[3.1.304] Remote Session

[3.1.305] In MegaRAC SP, use this page to configure virtual
media configuration settings for the next redirection session.
Encryption is disabled by default.
D
ESCRIPTION
3-33
[3.1.306] To open Remote Session page, click Configuration >
Remote Session from the main menu. A sample screenshot of
Remote Session Page is shown in the screenshot below.
[3.1.307] Remote Session
[3.1.308] The fields of Remote Session Settings Page are
explained below.
[3.1.309] Remote Session Settings Page
I
TEM
Enable/Disable encryption on KVM data for the
KVM Encryption
next redirection session.
Enable/Disable encryption on Media data for the
Media Encryption
next redirection session.
Two types of VM attach mode are available:
Attach: Immediately attaches Virtual Media to

Virtual Media Attach the server upon bootup.
Mode
Auto Attach: Attaches Virtual Media to the

server only when a virtual media session is
started.
C G
ONFIGURATION ROUP
D
ESCRIPTION