Virtual Media - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC
Note:
[3.1.401] There is a list of reserved users which cannot be
added / modified as BMC users. Please Refer "MEGARAC SP-
X Platform Porting Guide" section "Changing the Configurations
in PMC File-> User Configurations in PMC File" for the list of
reserved users.

[3.1.402] Virtual Media

[3.1.403] In MegaRAC GUI, this page to configure Virtual
Media device settings. If you change the configuration of the
virtual media in this page, it shows the appropriate device in the
JViewer Vmedia dialog. For example, if you select two floppy
devices in Configure Virtual Media page, then in JViewer >
Vmedia, you can view two floppy device panel.
[3.1.404] To open Virtual Media page, click Configuration >
Virtual Media from the main menu. A sample screenshot of
User Management Page is shown in the screenshot below.
[3.1.405] Configure Virtual Media Devices
[3.1.406] The following fields are displayed in this page.
[3.1.407] Configure Virtual Media Devices
I
TEM
The number of floppy devices that support for
Floppy devices
Virtual Media redirection.
The number of CD/DVD devices that support for
CD/DVD devices
Virtual Media redirection.
The number of hard disk devices that support for
Hard disk devices
Virtual Media redirection.
To enable or disable the local media support for
Local Media Support
Virtual Media redirection.
Save To save the configured settings.
Reset To reset the previously-saved values.
[3.1.408] Procedure:
3.1.409.1.Select the number of Floppy devices, CD/DVD
devices and Hard disk devices from the dropdown list.
Note:
[3.1.410] Maximum of two devices can be added in Floppy, CD/
DVD and Hard disk drives.
3.1.411.2.Enable the Local Media Support if needed.
3.1.412.3.Click Save to save the changes made else click
Reset to reset the previously saved values.
3-45
C G
ONFIGURATION ROUP
D
ESCRIPTION