Server Power Control - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC
[3.1.464] Power
[3.1.465] The power option is to perform any power cycle oper-
ation. Click on the required option to perform the following
operation. Reset Server: To reboot the system without power-
ing off (warm boot).
[3.1.466] Power
I
TEM
Power Off Server -
To immediately power off the server.
Immediate
Power Off Server - To initiate operating system shutdown prior to
Orderly Shutdown the shutdown.
Power On Server To power on the server.
To first power off, and then reboot the system
Power Cycle Server
(cold boot).
[3.1.467] Active Users
[3.1.468] Click this option to displays the active users and their
system IP address.
[3.1.469] Help
[3.1.470] Jviewer: Displays the copyright and version informa-
tion
D
ESCRIPTION
3-52
[3.1.471] Quick Buttons
[3.1.472] The lower right of Console Redirection windows dis-
plays all the quick buttons. These quick buttons helps you to
perform these functions by just clicking them.
Note:
[3.1.473] This option is available only when you launch the
Java Console. Server Power Control.

[3.1.474] Server Power Control

[3.1.475] This page allows you to view and control the power of
your server.
[3.1.476] To open Power Control and Status page, click
Remote Control > Server Power Control from the main
R C
EMOTE ONTROL