QUANTA W Mainboard Series S210-MBT2W Technical Manual page 206

BMC
[3.1.157] Entering the details in Advanced LDAP Settings
Page
3.1.158.1.In the LDAP Settings Page, click Advanced Set-
tings. A sample screenshot of LDAP Settings page is
given below.
[3.1.159] Advanced LDAP Settings
3.1.160.2.To enable/disable LDAP Authentication, check or
uncheck the Enable checkbox respectively.
Note:
[3.1.161] At login prompt, enter username to login as an LDAP
group member.
3.1.162.3.Enter the IP address of LDAP server in the IP
Address field.
Note:
IP Address made of 4 numbers separated by dots as in

'xxx.xxx.xxx.xxx'.
Each Number ranges from 0 to 255.

First Number must not be 0.

Supports IPv4 Address format and IPv6 Address format.

3.1.163.4.Specify the LDAP Port in the Port field.
Note:
[3.1.164] Default Port is 389. For Secure connection, default
port is 636.
3.1.165.5.Enter the Search Base. The Search base tells the
LDAP server which part of the external directory tree to
search. The search base may be something equivalent to
the organization, group of external directory.
Note:
Searchbase is a string of 4 to 63 alpha-numeric characters.

It must start with an alphabetical character.

Special Symbols like dot(.), comma(,), hyphen(-), under-

score(_), equal-to(=) are allowed.
Example: ou=login,dc=domain,dc=com.

3.1.166.6.Click Save to save the settings.
3.1.167.7.Click Cancel to cancel the modified changes.
3-19
C G
ONFIGURATION ROUP