Mac Address Definition; Lan Manageability; Lan Connector Ordering; Wake-On-Lan - QUANTA W Mainboard Series S210-MBT2W Technical Manual

A S
BOUT THE ERVER

[1.3.129] MAC Address Definition

[1.3.130] The S210-MBT2W products have the following 3
MAC addresses assigned to it.
NIC 1 MAC address

NIC 2 MAC address - Assigned the NIC 1 MAC address

+1 (Server Management & WOL)
Dedicated NIC MAC address - Assigned the NIC 1 MAC

address +2

[1.3.131] LAN Manageability

[1.3.132] Port 2 (assuming 1 based numbering) will be used by
the BMC firmware to send management traffic. In standby in
order to save power, Port2 (assuming 1 based numbering); will
be the only port to support Wake on LAN. The EEPROM must
be programmed to turn off this feature from the other ports in
order to maximize power savings during sleep states.

[1.3.133] LAN Connector Ordering

[1.3.134] When looking in at the I/O panel the NIC 1 should be
wired to the left most RJ45 connector.
[1.3.135] MDI Flip Capability
[1.3.136] Powerville has MDI flip capability. This feature must
NOT be used because it will conflict with the LAN ordering.

[1.3.137] Wake-on-LAN

[1.3.138] WOL shall be supported on the Powerville LAN con-
troller for all supported Sleep states.
1-46
LAN M
ON OTHERBOARD