User Management - QUANTA W Mainboard Series S210-MBT2W Technical Manual

BMC

[3.1.365] User Management

[3.1.366] In MegaRAC GUI, the User Management page allows
you to view the current list of user slots for the server. You can
add a new user and modify or delete the existing users.
[3.1.367] To open User Management page, click Configuration
> Users from the main menu. A sample screenshot of User
Management Page is shown in the screenshot below.
[3.1.368] User Management
[3.1.369] The fields of User Management Page are explained
below.
[3.1.370] User Management Page
I
TEM
Displays the ID number of the user.
Note:
User ID
[3.1.371] The list contains a maximum of ten
users only.
User Name Displays the name of the user.
To enable or disable the access privilege of the
User Access
user.
Displays the network access privilege of the
Network Privilege
user.
Displays if the SNMP status for the user is
SNMP Status
enabled or Disabled.
Email ID Displays email address of the user.
Add User To add a new user. Modify.
User To modify an existing user.
Delete User To delete an existing user.
[3.1.372] Procedure:
Note:
[3.1.373] The Free slots are denoted by "~" in all columns for
the slot.
[3.1.374] Add a new user:
3-42
C G
ONFIGURATION ROUP
D
ESCRIPTION