QUANTA W Mainboard Series S210-MBT2W Technical Manual page 202

BMC
3.1.120.9.In the Active Directory Settings Page, select a
blank row and click Add Role Group to open the Add
Role group Page as shown in the screenshot below.
[3.1.121] Add Role group Page
3.1.122.10.In the Role Group Name field, enter the name
that identifies the role group in the Active Directory.
Note:
Role Group Name is a string of 255 alpha-numeric charac-

ters.
Special symbols hyphen and underscore are allowed.

3.1.123.11.In the Role Group Domain field, enter the
domain where the role group is located.
Note:
Domain Name is a string of 255 alpha-numeric characters.

Special symbols hyphen, underscore and dot are allowed.

3.1.124.12.In the Role Group Privilege field, enter the level
of privilege to assign to this role group.
3.1.125.13.Click Add to save the new role group and return
to the Role Group List.
3.1.126.14.Click Cancel to cancel the settings and return to
the Role Group List.
[3.1.127] To modify a Role Group
3.1.128.15.In the Advanced Directory Settings Page, select
the row that you wish to modify and click Modify Role
Group.
3.1.129.16.Make the necessary changes and click Save.
[3.1.130] To delete a Role Group
3.1.131.17.In the Advanced Directory Settings Page, select
the row that you wish to delete and click Delete Role
Group.
[3.1.132] DNS
[3.1.133] The Domain Name System (DNS) is a distributed
hierarchical naming system for computers, services, or any
resource connected to the Internet or a private network. It asso-
ciates the information with domain names assigned to each of
the participants. Most importantly, it translates domain names
meaningful to humans into the numerical (binary) identifiers
associated with networking equipment for the purpose of locat-
ing and addressing these devices worldwide. In MegaRAC GUI,
the DNS Server settings page is used to manage the DNS set-
tings of a device.
3-15
C G
ONFIGURATION ROUP