QUANTA W Mainboard Series S210-MBT2W Technical Manual page 230

BMC
3.1.375.1.To add a new user, select a free slot and click Add
User. This opens the Add User screen as shown in the
screenshot below.
[3.1.376] Add User Page
3.1.377.2.Enter the name of the user in the User Name field.
Note:
User Name is a string of 4 to 16 alpha-numeric characters.

It must start with an alphabetical character.

It is case-sensitive.

Special characters ','(comma), '.'(period), ':'(colon), ';'(semi-

colon), ' '(space), '/'(slash), '\'(backslash), '('(left bracket) and
')'(right bracket) are not allowed.
3.1.378.3.In the Password and Confirm Password fields,
enter and confirm your new password.
Note:
Password must be at least 8 characters long.

White space is not allowed.

This field will not allow more than 20 characters.

3.1.379.4.Enable or Disable the User Access Privilege.
3.1.380.5.In the Network Privilege field, enter the network
privilege assigned to the user which could be Administra-
tor, Operator, User or No Access.
3.1.381.6.Check the SNMP Status check box to enable
SNMP access for the user.
Note:
[3.1.382] Password field is mandatory, if SNMP Status is
enabled.
3.1.383.7.Choose the SNMP Access level option for user
from the SNMP Access dropdown list. Either it can be
Read Only or Read Write.
3.1.384.8.Choose the Authentication Protocol to use for
SNMP settings from the drop down list.
Note:
[3.1.385] Password field is mandatory, if Authentication proto-
col is changed.
3.1.386.9.Choose the Encryption algorithm to use for SNMP
settings from the Privacy protocol dropdown list.
3-43
C G
ONFIGURATION ROUP