Server Power Control - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE
Quick Buttons
The lower right of Console Redirection windows displays all the
quick buttons. These quick buttons helps you to perform these
functions by just clicking them.
Note:
This option is available only when you launch the Java Console.

Server Power Control.

Server Power Control
This page allows you to view and control the power of your
server.
To open Power Control and Status page, click Remote Control
> Server Power Control from the main menu. A sample
screenshot of Power Control and Status page is shown in the
screenshot below.
Figure 4-42. Power Control and Status Page
The various options of Power Control are given below.
Table 4-50: Server Power Control
I
TEM
This option will reboot the system without
Reset Server
powering off (warm boot).
Power Off Server –
This option will immediately power off the server.
Immediate
Power Off Server – This option will initiate operating system
Orderly Shutdown shutdown prior to the shutdown.
Power On Server This option will power on the server.
This option will first power off, and then reboot
Power Cycle Server
the system (cold boot).
Click this option to perform the selected
Perform Action
operation.
Procedure:
Select an action and click Perform Action to proceed with the
selected action.
Note:
You will be asked to confirm your choice. Upon confirmation, the
command will be executed and you will be informed of the status.
4-55
R C
EMOTE ONTROL
D
ESCRIPTION