Virtual Media - QUANTA QuantaGrid S31A-1U User Manual

BMC

Virtual Media

In MegaRAC GUI, this page is to configure Virtual Media device settings. If you change the
configuration of the virtual media in this page, it shows the appropriate device in the
JViewer Vmedia dialog. For example, if you select two floppy devices in Configure Virtual
Media page, then in JViewer > Vmedia, you can view two floppy device panel, these vir-
tual media devices will only setup when Launching the KVM.
To open Virtual Media page, click Configuration > Virtual Media from the main menu. A
sample screenshot of User Management Page is shown in the screenshot below.
The following fields are displayed in this page.
Table 28: Configure Virtual Media Devices
I
TEM
Floppy devices
CD/DVD devices
Hard disk devices
Remote KVM Floppy Devices
Remote KVM CD/DVD Devices
Remote KVM Hard disk Devices
Save
Reset
Figure 3-42. Configure Virtual Media Devices
The number of floppy devices that support for Virtual Media redirec-
tion.
The number of CD/DVD devices that support for Virtual Media redirec-
tion.
The number of hard disk devices that support for Virtual Media redirec-
tion.
The number of floppy devices that support for KVM Virtual Media redi-
rection.
The number of CD/DVD devices that support for KVM Virtual Media
redirection.
The number of Hard disk devices that support for KVM Virtual Media
redirection.
To save the configured settings.
To reset the previously-saved values.
C
ONFIGURATION
D
ESCRIPTION
G
ROUP
3-66