Remote Session - QUANTA QuantaGrid S31A-1U User Manual

BMC

Remote Session

In MegaRAC SP, use this page to configure virtual media configuration settings for the
next redirection session. Encryption is disabled by default.
To open Remote Session page, click Configuration > Remote Session from the main
menu. A sample screenshot of Remote Session Page is shown in the screenshot below.
The fields of Remote Session Settings Page are explained below.
Table 20: Remote Session Settings Page
I
TEM
Single Port Application
KVM Encryption
Keyboard Languages
Retry Count
Retry Interval
Figure 3-32. Remote Session
Enable/Disable single port support by runtime. On changing this configura-
tion, KVM and VMedia Sessions will be restarted. If this support is enabled,
KVM session will not use its dedicated port whereas both Web and KVM ses-
sions will be established only via Web Port. If this support is disabled, KVM
and Web sessions will use their own dedicated ports respectively.
Enable/Disable Encryption of KVM data for the next redirection session. If
KVM Encryption is enabled, the KVM session will use the Secure port which
has been configured in Configuration > Services page. If KVM Encryption
is disabled, the KVM session will use the Non-Secure port which has been
configured in Configuration > Services page.
Note:
This option is disabled if Single Port is enabled.
This option is used to select the keyboard supported languages.
This option is used to retry the redirection session for certain number of
attempts.
This option is used to give time interval for each attempt.
C
D
ESCRIPTION
G
ONFIGURATION ROUP
3-52