Ldap/E-Directory - QUANTA STRATOS S210 Series S210-X2A2J Technical Manual

BMC
DNS Server Settings Page (Continued)
I
TEM
Specify the DNS (Domain Name System) server
address to be configured for the BMC.
IPv4 Address made of 4 numbers separated

by dots as in "xxx.xxx.xxx.xxx".
DNS Server1, DNS
Each number ranges from 0 to 255.

Server2 and DNS
Server3 First number must not be 0.

DNS Server Address will support the following:
IPv4 Address format.

IPv6 Address format.

Save To save the entered changes.
Reset To reset the entered changes.
Procedure:
1. Choose the Host Configuration as either Automatic or
Manual.
Note:
Under Automatic, a Host Name is not necessary but under
Manual, a Host Name is not.
2. Enter the Host Name in the given field if you have chosen
Manual Configuration.
3. Under Register BMC,
D
ESCRIPTION
4-23
Check the option Register BMC to register with this

DNS settings.
4. In the Domain name Configuration Settings,
Select the domain settings from the dropdown list.

Enter the Domain Name in the given field.

5. In the Domain Name Server Configuration,
Select the DNS Server Settings, from the dropdown list.

In the IP Priority, IPV4 or IPV6 as a top priority.

In the DNS Server1/DNS Server2/DNS Server3 field,

If the DNS Server Settings is setting to Manual mode, user
needs to fill those fields with DNS IP address manually
according to IPv4 or IPv6 format. Otherwise, if it is in non-
Manual mode, DNS server IP address is assigned by DHCP
server.
6. Click Save to save the entries.
7. Click Reset to reset the entries.

LDAP/E-Directory

The Lightweight Directory Access Protocol (LDAP) is an
application protocol for querying and modifying data of directory
services implemented in Internet Protocol (IP) networks.
In MegaRAC GUI, LDAP is an Internet protocol that Mega-
®
RAC card can use to authenticate users. If you have an LDAP
server configured on your network, you can use it as an easy
C G
ONFIGURATION ROUP