Table of Contents
Advertisement
GET STARTED
SETTING UP YOUR WATCH
To wake up and charge your watch, plug it into a powered USB port or a USB charger with the custom cable that came
in the box. The cable magnetically snaps into place. Please note that it may take a while for the charging animation to
appear on the display. We recommend that you charge the battery before you start using your watch. See
detailed information on charging the battery.
To set up your watch, choose your language and preferred setup method. The watch gives you three options for setup:
Browse to the option most convenient for you by swiping the display up or down. Tap the display to confirm your
selection.
A.
On your
phone: Mobile setup is convenient if you don't have access to a computer with a USB port, but
it might take longer. This method requires an internet connection.
B.
On your
computer: Wired computer setup is quicker and you can charge your watch at the same time,
but you need a computer available. This method requires an internet connection.
The A and B options are recommended. You can fill in all the physical details required for
accurate training data at once. You can also choose your language and get the latest
firmware for your watch.
C.
On your
watch: If you don't have a compatible mobile device and can't get to a computer with an
internet connection right away, you can start from the watch.
from the watch, your watch is not yet connected with Polar Flow. It's important that you do the setup
later via option A or B to get the latest firmware updates to your Ignite 3.
detailed analysis of your training, activity and sleep data.
OPTION A: SET UP WITH A PHONE AND POLAR FLOW APP
Please note that you have to do the pairing in the Flow app and NOT in your phone's Bluetooth settings.
1. Keep your watch and phone close to each other during setup.
2. Make sure your phone is connected to the internet and turn on Bluetooth.
3. Download the Polar Flow app from the App Store or Google Play on your phone.
4. Open the Flow app on your phone.
5. The Flow app recognizes your watch nearby and prompts you to start pairing it. Tap the Start button on the Flow
app.
6. When the
Bluetooth Pairing Request
on your phone matches the code shown on your watch.
7. Accept the Bluetooth pairing request on your phone.
8. Confirm the pin code on your watch by tapping the display.
Please note that when you do the setup
confirmation message appears on your phone, check that the code shown
9
Battery
In Flow you can also see a
for
Advertisement
Table of Contents
