Get Started; Setting Up Your Watch - Polar Electro VANTAGE M2 User Manual

GET STARTED

SETTING UP YOUR WATCH

To wake up and charge your watch, plug it into a powered USB port or a USB charger with the custom cable that
came in the box. The cable magnetically snaps into place, just make sure to align the ledge on the cable with the slot on
your watch (marked with red). Please note that it may take a while for the charging animation to appear on the display.
We recommend that you charge the battery before you start using your watch. See
charging the battery.
Alternatively, you can wake up your watch by pressing and holding OK for 4 seconds.
To set up your watch, choose your language and preferred setup method. The watch gives you three options for
setup: Browse to the option most convenient for you with UP/DOWN and confirm your selection with OK.
A. On your phone: Mobile setup is convenient if you don't have access to a computer with a USB port, but
it might take longer. This method requires an Internet connection.
B. On your computer: Wired computer setup is quicker and you can charge your watch at the same time,
but you need a computer available. This method requires an internet connection.
The A and B options are recommended. You can fill in all the physical details required for
accurate training data at once. You can also choose language and get the latest firmware for
your watch.
C. On your watch: If you don't have a compatible mobile device and can't get to a computer with an
internet connection right away, you can start from the watch. Please note that when you do the setup
from the watch, your watch is not yet connected with Polar Flow.
watch are available only through Polar Flow. To make sure you get to enjoy your watch and the
unique Polar features at their best, it's important that you do the setup later in the Polar Flow web service
or with the Polar Flow mobile app by following the steps in option A or B.
Battery
Firmware updates
9
for detailed information on
for your