Installing The Kx-Ps8000 Software; Installing The Printer Driver And Utilities For Windows 3.1 - Panasonic KX-PS8000 Setup Manual

Installing the KX-PS8000 Software

The KX-PS8000 software installation will create the
following.
BPrinter driver for Windows 3.1, Windows 95 or
Windows NT 4.0
BTWAIN scanner driver (32 bit and/or 16 bit)
BDigital Duplicator Utility
BStatus Display for Windows 3.1, Windows 95 or
Windows NT 4.0
Notes:
B If you are using Windows 3.1, disable or
uninstall any application software's printer
status to prevent conflicts with the KX-PS8000
Status Display for Windows 3.1.
B When reinstalling the KX-PS8000 software, do
it immediately after restarting Windows.
To install the bundled software (Corel Photo-Paint,
TextBridge, or Panasonic font manager), refer to
page 37 "Installing the Bundled Software".
Installing the Printer Driver and
Utilities for Windows 3.1
1
Start Windows 3.1.
2
Quit all applications.
3
Insert the KX-PS8000 CD-ROM into
your computer's CD-ROM drive.
Click File from the Program
4
Manager, then click Run... .
5
Click Browse and select your CD-
ROM drive from the [Drives:] box.
6
Select Setup.exe, and click OK .
7
Click OK .
The Installer starts.
8
Follow the instructions on the screen
to complete the installation.
31