Configure Traffic Control; Manage Mac Filtering - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2

Configure Traffic Control

You can configure MAC filters, storm control, port security, protected port, and private VLAN
settings.

Manage MAC Filtering

You can create MAC filters that limit the traffic that is allowed into specified ports on the
switch.
Create a MAC Filter

To create a MAC filter:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > MAC Filter > MAC Filter Configuration.
Change the Default IP Address of the
Manage Device Security
210