NETGEAR M4100 Series User Manual page 291
Managed switch
Hide thumbs
Also See for M4100 Series:
- Reference manual (578 pages) ,
- Hardware installation manual (34 pages) ,
- Software setup manual (27 pages)
Table of Contents
Advertisement
7.
Select Security
Access > SSH
8.
In the File Type menu, specify the type of file to transfer:
•
SSH-1 RSA Key File. SSH-1 Rivest-Shamir-Adleman (RSA) Key file
•
SSH-2 RSA Key PEM File. SSH-2 Rivest-Shamir-Adleman (RSA) Key file (PEM
Encoded)
•
SSH-2 DSA Key PEM File. SSH-2 Digital Signature Algorithm (DSA) Key file (PEM
Encoded)
9.
In the Transfer Mode menu, specify the protocol to use to transfer the file:
•
TFTP. Trivial File Transfer Protocol
•
SFTP. Secure File Transfer Protocol
•
SCP. Secure Copy Protocol
10.
In the Server Address Type field, specify either IPv4, IPv6, or DNS to indicate the format of
the TFTP/SFTP/SCP Server Address field.
The factory default is IPv4.
11.
Use Server Address to enter the IP address or DNS host name of the server in accordance
with the format indicated by the server address type.
The factory default is the IPv4 address 0.0.0.0.
12.
Use Remote File Path to enter the path of the file to download.
You can enter up to 96 characters. The factory default is blank.
13.
Use Remote File Name to enter the name of the file on the TFTP server to download.
You can enter up to 32 characters. The factory default is blank.
14.
Click the APPLY button.
The host key file starts downloading.
Note:
To download SSH key files, SSH must be administratively disabled
and there can be no active SSH sessions.
M4100 Series Managed Switch
Host Keys Download.
Manage Device Security
291
Hide quick links:
Advertisement
Table of Contents
