View Detailed Port Statistics - NETGEAR M4100 Series User Manual

• To refresh the screen and display the current statistics, click the REFRESH button.
The following table describes the port statistics fields.
Table 99. Port statistics
Field
Interface
Total Packets Received
Without Errors
Packets Received With Error The number of inbound packets that contained errors preventing them from
Broadcast Packets Received The total number of good packets received that were directed to the
Packets Transmitted Without
Errors
Transmit Packet Errors
Collision Frames
Time Since Counters Last
Cleared

View Detailed Port Statistics


To view detailed port statistics:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
M4100 Series Managed Switch
Description
The interface of the interface table entry associated with this port on an
adapter.
The total number of packets received that were without errors.
being deliverable to a higher-layer protocol.
broadcast address. Note that this does not include multicast packets.
The number of frames that were transmitted by this port to its segment.
The number of outbound packets that could not be transmitted because of
errors.
The best estimate of the total number of collisions on this Ethernet segment.
The elapsed time in days, hours, minutes, and seconds since the statistics
for this port were last cleared.
Monitoring the System
371