Configure Mvr Groups - NETGEAR M4100 Series User Manual

13. Click the APPLY button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The following table describes the nonconfigurable information displayed on the screen.
Table 57. MVR Configuration
Field
MVR Max Multicast Groups
MVR Current Multicast Groups

Configure MVR Groups


To configure MVR groups:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Switching > MVR > Advanced > MVR Group Configuration.
8. In the MVR Group IP list, specify the IP address for the new MVR group.
9. In the Count field, specify the number of contiguous MVR groups.
M4100 Series Managed Switch
Definition
Displays the maximum number of multicast groups
that MVR supports.
Displays current number of the MVR groups
allocated.
Configure Switching Information
185