NETGEAR M4100 Series User Manual page 277

The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.

7. Select Security Management Security > Authentication List
List.
8. If you are creating a new list, type the name in the List Name field.
The name can be up to 15 alphanumeric characters long and is not case-sensitive.
9. In the numbered lists (1, 2, 3, 4, 5) select the method to appear first in the selected
authentication enable list.
The options are as follows:
- Enable. The privileged EXEC password is used for authentication.
- Line. The line password is used for authentication.
- None. The user cannot be authenticated.
- RADIUS. The user's name and password are authenticated using the RADIUS server
instead of local server.
- TACACS. The user's name and password are authenticated using the TACACS
server.
- Deny. Authentication always fails.
10. To add a new login list to the switch, click the ADD button.
11. To remove the selected authentication enable list from the configuration, click the DELETE
button.
You can use this button only if you are logged in as admin (with Read/Write access).
12. Click the APPLY button.
Your settings are saved.
M4100 Series Managed Switch
Manage Device Security
277

Enable Authentication