NETGEAR M4100 Series User Manual page 387

The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Monitoring
The screen also displays information about the traps that were sent.
8. To clear the counters, click the Clear Counters button.
This resets all statistics for the trap logs to the default values.
The following table describes the fields in the Trap Logs screen.
Table 103. Trap Logs
Field
Number of Traps Since Last
Reset
Trap Log Capacity
Number of Traps since log
last viewed
Log
M4100 Series Managed Switch

Logs > Trap Logs.
Description
The number of traps that occurred since the switch last rebooted.
The maximum number of traps stored in the log. If the number of traps
exceeds the capacity, the entries overwrite the oldest entries.
The number of traps that occurred since the traps were last displayed.
Displaying the traps by any method (terminal interface display, web display,
upload file from switch, and so on) causes this counter to be cleared to 0.
The sequence number of this trap.
Monitoring the System
387