NETGEAR M4100 Series User Manual page 105

Table 30. LLDP-MED remote device information (continued)
Field
Media Application Type
VLAN Id
Priority
DSCP
Unknown Bit Status
Tagged Bit Status
Inventory Information: Specifies if the inventory TLV is received in LLDP frames on this port.
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
Location Information: Specifies if the location TLV is received in LLDP frames on this port.
Sub Type
Location Information
Extended POE: Specifies if the remote device is a PoE device.
Device Type
Extended POE PSE: Specifies if the extended PSE TLV is received in LLDP frame on this port.
Available
Source
Priority
Extended POE PD: Specifies if the extended PD TLV is received in LLDP frame on this port.
M4100 Series Managed Switch
Description
The application type. Types of applications are unknown,
voicesignaling, guestvoice, guestvoicesignalling,
softphonevoice, videoconferencing, streammingvideo,
and vidoesignalling. Each application type that is
received has the VLAN ID, priority, DSCP, tagged bit
status, and unknown bit status. A port can receive one or
many such application types. Only when a network policy
TLV was received on this port, is this information
displayed.
The VLAN ID associated with a particular policy type.
The priority associated with a particular policy type.
The DSCP associated with a particular policy type.
The unknown bit associated with a particular policy type.
The tagged bit associated with a particular policy type.
The hardware version of the remote device.
The Firmware version of the remote device.
The Software version of the remote device.
The serial number of the remote device.
The manufacturers name of the remote device.
The model name of the remote device.
The asset ID of the remote device.
The type of location information.
The location information as a string for given type of
location ID.
The remote device's PoE device type connected to this
port.
The remote port's PSE power value in tenths of watts.
The remote port's PSE power source.
The remote port's PSE power priority.
Configure System Information
105