NETGEAR M4100 Series User Manual page 109

6. Click the Login button.
The web management interface menu displays.

7. Select System ISDP
8. Select the Admin Mode Enable radio button.
The default value is Enable.
9. In the Timer field, specify the period of time between sending new ISDP packets.
The range is 5 to 254 seconds. The default value is 30 seconds.
10. In the Hold Time field, specify the hold time for ISDP packets that the switch transmits.
The hold time specifies how long a receiving device should store information sent in the
ISDP packet before discarding it. The range 10 to 255 seconds. The default value is 180
seconds.
11. Select the Version 2 Advertisements Disable or Enable radio button.
This setting controls the sending of ISDP version 2 packets from the device. The default
value is Enable.
12. Click the APPLY button.
Your settings are saved.
The following table describes the ISDP Advanced Global Configuration fields.
Table 33. ISDP Advanced Global Configuration
Field
Neighbors table last time changed Displays when the Neighbors table last changed.
Device ID
Device ID format capability
Device ID format
M4100 Series Managed Switch
 
Advanced Global Configuration.
Description
Displays the device ID of this switch.
Displays the device ID format capability.
Displays the device ID format.
Configure System Information
109