Download Http Files - NETGEAR M4100 Series User Manual

The factory default is IPv4.
12. Use Server Address to enter the IP address of the server in accordance with the format
indicated by the server address type.
The factory default is the IPv4 address 0.0.0.0.
13. Use Remote File Path to enter the path of the file to download.
The file path cannot include the following symbols: ' \:*?"<>| '. Up to 32 characters can be
entered. The factory default is blank.
14. Use Remote File Name to enter the name of the file to download from the server.
You can enter up to 32 characters. The factory default is blank.
15. Use User Name to enter the user name for remote login to SFTP/SCP server where the file
resides.
This field is visible only when the SFTP or SCP transfer mode is selected.
16. Use Password to enter the password for remote login to SFTP/SCP server where the file
resides.
This field is visible only when the SFTP or SCP transfer mode is selected.
17. The last row of the table is used to display information about the progress of the file transfer.
The screen refreshes automatically until the file transfer completes.

Download HTTP Files


To download a file to the switch by using HTTP:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
M4100 Series Managed Switch
Maintenance
415