Configure Oui-Based Port Settings - NETGEAR M4100 Series User Manual

The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Switching > Auto-VoIP > OUI-based
8. In the Auto-VoIP VLAN ID field, specify the VoIP VLAN ID on the switch.
The range is 1 to 4093. A VLAN ID value of 0 implies that there is no Auto-VoIP VLAN
configured. VLAN ID default value is 2.
9. Use OUI-based priority to configure OUI-based priority on the switch.
The range is 0 to 7. The default value is 7.
10. Click the APPLY button.
The settings are sent to the switch. Configuration changes take effect immediately. These
changes are not retained across a power cycle unless you save the configuration. See
Save Configuration

Configure OUI-Based Port Settings


To display the OUI port settings:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
M4100 Series Managed Switch
on page 405.
Configure Switching Information
142

Properties.