Map Ip Dscp Values To Queues - NETGEAR M4100 Series User Manual

The values in each list represent the traffic class. The traffic class is the hardware queue
for a port. Higher traffic class values indicate a higher queue position. Before traffic in a
lower queue is sent, it must wait for traffic in higher queues to be sent.
10. Click the APPLY button.
Your changes are applied to the system.

Map IP DSCP Values to Queues

You can specify the internal traffic class to map to the corresponding DSCP value.

To map DSCP values to queues:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
M4100 Series Managed Switch
Configure Quality of Service
237