Configure Advanced Poe Settings - NETGEAR M4100 Series User Manual

Table 22. PoE Configuration (continued)
Field
Power Status
Total Power (Main AC)
Total Power (RPS)
Power Source
Threshold Power
Consumed Power

Configure Advanced PoE Settings


To configure advanced PoE settings:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > PoE > Advanced > PoE Configuration.
M4100 Series Managed Switch
Description
Indicates the power status.
Displays the total power provided by the MAIN AC power source.
Displays the total power provided by the redundant power source.
Current source of system power (Main AC or RPS).
System can power up one port, if consumed power is less than this
power. That is, consumed power can be between Nominal & Threshold
Power values. The threshold power value is effected by changing
System Usage Threshold.
Total amount of a power that is currently being delivered to all ports.
Configure System Information
78