NETGEAR M4100 Series User Manual page 32

5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Management > USB Device Information.
8. Click the REFRESH button to refresh the screen with the latest information.
The following table describes USB Device Details information.
Table 6. USB device Information
Field
Device Status
Manufacturer
Serial Number
USB Version Compliance
Class Code
USB Device Details
Subclass Code
Protocol
Vendor ID
M4100 Series Managed Switch
Description
The current status of device. Active if the device is USB plugged in and
recognized by the switch. Inactive if the device is not mounted. Invalid if
the device is not present or invalid device is plugged in.
The USB flash drive device manufacturer.
The USB flash drive device serial number.
The USB flash drive device version.
The USB flash drive device class.
The USB flash drive device subclass.
The USB flash drive device protocol.
The USB flash drive device vendor ID.
Configure System Information
32