NETGEAR M4100 Series User Manual page 244

Packet processing begins by testing the match criteria for a packet. The all class type option
defines that each match criteria within a class must evaluate to true for a packet to match that
class. The any class type option specifies that at least one match criteria must evaluate to
true for a packet to match that class. Classes are tested in the order in which they were
added to the policy. A policy is applied to a packet when a class match within that policy is
found.

To configure DiffServ:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.

7. Select QoS DiffServ
M4100 Series Managed Switch
 
Basic DiffServ Configuration.
Configure Quality of Service
244