Configure Snmp V3 Settings For A User - NETGEAR M4100 Series User Manual

7. Select System
In the Name field, the screen displays the RFC number if applicable and the name of the
MIB.

Configure SNMP v3 Settings for a User


To configure SNMP v3 settings for a user:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
M4100 Series Managed Switch
 
SNMP SNMP V1/V2
Configure System Information

Supported MIBs.
88