Configure An Ip Acl - NETGEAR M4100 Series User Manual

7. Select Security
To delete a MAC ACL-to-interface binding, select the check box next to the interface and click
the DELETE button.
The following table describes the information displayed in the MAC Binding Table.
Table 94. MAC Binding Table
324 Field
Interface
Direction
ACL Type
ACL ID
Sequence Number

Configure an IP ACL

An IP ACL consists of a set of rules that are matched sequentially against a packet. When a
packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken and
the additional rules are not checked for a match.

To configure an IP ACL:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
M4100 Series Managed Switch
 
ACL > Basic Binding Table.
Description
The interface of the ACL assigned.
The selected packet filtering direction for the ACL.
The type of ACL assigned to the selected interface and direction.
The ACL name identifying the ACL assigned to the selected interface
and direction.
The sequence number signifying the order of the specified ACL relative
to the other ACLs assigned to the selected interface and direction.
Manage Device Security
354